Jay Electronique Orion Radio Control Push Button Remote Control Transmitter

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Orion Radio Transmitters

This range of Orion remote control units from Jay Electronique are designed to satisfy the needs of a wide range of standard and industrial applications. These compact and light weight transmitters offer increased freedom of movement whilst retaining ease of use.

Radio remote control range suitable for numerous industrial applications.
European frequency bands from 433 to 434 MHz with 18 possible frequencies.
Programming of various functions via jumper switches or microswitch
Compact, light, robust transmitters.
"On/Off" buttons on certain models
Applications: lifting, elevator table, conveyors, raising industrial barriers.

Specificaties
Kenmerk Waarde
Series Orion
IP Rating IP65
Body Material ABS
Maximum Operating Temperature +50°C
Minimum Operating Temperature -20°C
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
2 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
163,93
(excl. BTW)
198,36
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 163,93
5 - 11
€ 158,91
12 +
€ 153,77
Related Products
Telemecanique Lesswire XZBW series wireless transmitters and receivers ...
Description:
Telemecanique Lesswire XZBW series wireless transmitters and receivers for use with a wide range of sensors. This range includes transmitters and receivers which communicate via 2.4 GHz radio transmission. Reduced cabling benefits applications where wiring or wire maintenance is not ...
A range of IP65 protected components which are ...
Description:
A range of IP65 protected components which are easily and quickly mounted in 16mm diameter holes. Each component can be ordered separately to build the required device. Also available are contact blocks with slow-break positive opening contacts with ’Faston’/solder connections. ...
A selection of Harmony XB5 series of chromium ...
Description:
A selection of Harmony XB5 series of chromium plated metal control and signalling units designed for use in the most extreme environments. Supplied with several different profile colouring heads including red, orange and yellow which can be used to identify ...
Panel mounting for use in Zone 1 hazardous ...
Description:
Panel mounting for use in Zone 1 hazardous areas. Maximum panel thickness is 5mm and the mounting hole required is 30.5mm diameter.,Front element is fixed to panel using the clamp nut. Body/contact block components fitted from rear utilising the built ...