Enclosed Push Button, IP66 79mm 75mm 101mm

  • RS-stocknr. 521-3605
  • Fabrikantnummer 1TVC101000P3102
  • Fabrikant ABB
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CZ
Productomschrijving

Single Start/Stop Control Stations

Standards

IEC 60947-5-1, IEC 60947-5-5

ABB

Robustly constructed, suitable for indoor or outdoor use
Ingress protection to IP65 with metric conduit entries
Supplied with contact block, additional contact blocks can be fitted
Emergency stop complies with EN418

Specificaties
Kenmerk Waarde
IP Rating IP66
Length 75mm
Width 101mm
Depth 79mm
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
25,90
(excl. BTW)
31,34
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 25,90
Related Products
Eaton RMQ-Titan 22 mm range of flat compact ...
Description:
Eaton RMQ-Titan 22 mm range of flat compact contact blocks. The compact contact blocks provide greater flexibility and more space than standard RMQ contact blocks. Designed to allow quick assembly of panel mount indicators and control components with a reduced ...
Panel mounting for use in Zone 1 hazardous ...
Description:
Panel mounting for use in Zone 1 hazardous areas. Maximum panel thickness is 5mm and the mounting hole required is 30.5mm diameter.,Front element is fixed to panel using the clamp nut. Body/contact block components fitted from rear utilising the built ...
Robust construction pushbuttons with rubber cap sealing (IP66), ...
Description:
Robust construction pushbuttons with rubber cap sealing (IP66), suitable for use in cold, hot, damped, oily and other tough environments. 30mm hole mounting, with 42mm diameter rubber cap29mm depth behind panelTemperature range -30°C to +70°CChoice of coloursSupplied without Contact Blocks, ...
A selection of Harmony XB4 series of chromium ...
Description:
A selection of Harmony XB4 series of chromium plated metal control and signalling units designed for use in the most extreme environments. Supplied with several different profile colouring heads including red, orange and yellow which can be used to identify ...