ABB Enclosed Push Button, IP66 107mm 75mm 141mm

  • RS-stocknr. 521-3677
  • Fabrikantnummer 1TVL211000P3112
  • Fabrikant ABB
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CZ
Productomschrijving

Dual Start/Stop Control Stations

Standards

IEC 60947-5-1, IEC 60947-5-5

Standards

IEC 60947-5-1, IEC 60947-5-5

ABB

Robustly constructed, suitable for indoor or outdoor use
Ingress protection to IP65 with metric conduit entries
Supplied with contact block, additional contact blocks can be fitted
Emergency stop complies with EN418

Specificaties
Kenmerk Waarde
IP Rating IP66
Length 75mm
Width 141mm
Depth 107mm
17 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
57 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
47,08
(excl. BTW)
56,97
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 47,08
Related Products
Enclosure for command devices, 22 mm, round, Enclosure ...
Description:
Enclosure for command devices, 22 mm, round, Enclosure material plastic, enclosure top part gray, 1 control point plastic, Recess for label, A=pushbutton black label: O 1 NC, screw terminal, Floor mounting.
Polycarbonate enclosure with an ingress protection of IP65Flush ...
Description:
Polycarbonate enclosure with an ingress protection of IP65Flush 22mm diameter double insulated bezel pushbutton with spring return actionBody dimensions: 68 x 68 x 53mmKnockouts: 2 x 20mm (side) 2 x 19mm (base).
Green and red 22mm diameter, spring return double ...
Description:
Green and red 22mm diameter, spring return double insulated bezel push buttons Stop button fitted with 1 N/C contact block, start button fitted with 1 N/O contactI/O with red LED pilot light available ’STOP’ ’START’; version has marking on legend ...
Snap fitting modular range of 22.5mm control devicesUp ...
Description:
Snap fitting modular range of 22.5mm control devicesUp to six clip-together contact elements per actuatorStayput actuators convert with simple adaptor to spring returnFlush, surface or rear mounting.