Moflash PB125 NO/NC 6mm Enclosed Push Button, IP66 143.5mm Red Stainless Steel 125mm +70°C -40°C 4 Red 125mm

  • RS-stocknr. 901-0683
  • Fabrikantnummer PB125SNNKNFARD
  • Fabrikant Moflash
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Moflash PB125 Explosion Proof Pushbutton

The PB125 is a stainless steel pushbutton which has been approved for use in potentially explosive atmospheres and harsh environmental conditions. Typical applications are Oil and Gas, On-shore and Offshore, Chemical, Petrochemical, Refineries & Marine locations. It is ideally suited for use in fire alarm systems. The PB125 is compatible for use with a PLC, DCS and ESD systems via 4-20mA output. The design of this pushbutton allows for termination inside the unit.

Approved by ATEX, IECEx
ATEX: II 2G Exd IIC T4 - T6 (incorporating IIA & IIB )
Zones 1, 2, 21 & 22
Conforms to EN (IEC) 60079-0 EN (IEC) 60079-1 and EN54
Dustproof & Weatherproof
IP66 protection
Red (RAL3001)
Stainless Steel 316
RoHS compliant

Specificaties
Kenmerk Waarde
Series PB125
Number of Cutouts 4
Push Button Colour Red
Push Button Material Stainless Steel
Enclosure Colour Red
Contact Configuration NO/NC
Enclosure Material Stainless Steel
IP Rating IP66
Cutout Diameter 6mm
Push Button Actuation Self Reset
Length 125mm
Width 125mm
Depth 143.5mm
Maximum Operating Temperature +70°C
Maximum Current 6 A dc, 11 A ac
Maximum DC Voltage 30V
Maximum AC Voltage 250V
Terminal Type Screw
Hazardous Area Certification ATEX, IECEx
Minimum Operating Temperature -40°C
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
411,94
(excl. BTW)
498,45
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 411,94
Related Products
800K series piezoelectric push buttons features a robust ...
Description:
800K series piezoelectric push buttons features a robust 316 stainless steel body that achieves an IP69K rating. The piezoelectric circuit detects pressure on the surface of the button to provide a momentary actuation signal with no moving parts. 22.5 mm ...
The Siemens 3SUI series pushbutton control station is ...
Description:
The Siemens 3SUI series pushbutton control station is an enclosure for command devices made of plastic. The base mount enclosure has a clear light indicator in C position, a green pushbutton in position B and a red Pushbutton in position ...
Green and red 22mm diameter, spring return double ...
Description:
Green and red 22mm diameter, spring return double insulated bezel push buttons Stop button fitted with 1 N/C contact block, start button fitted with 1 N/O contactI/O with red LED pilot light available ’STOP’ ’START’; version has marking on legend ...
Flush Green and flush red spring return pushbuttonStop ...
Description:
Flush Green and flush red spring return pushbuttonStop button fitted with 1 N/C contact block, start button fitted with 1 N/O contactEach actuator will accept an additional contact block (see accessories)Double insulatedIP65 ratedPolycarbonate construction.