Schneider Electric Pendant Station Enclosure Harmony XACA, Polypropylene, 12 Cutouts, IP65 - Yellow

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: MA
Productomschrijving

Pendant Control Station XAC-A

Pendant control stations for auxiliary circuits. Designed for mechanical handling, these highly robust pendant control stations comply with the safety requirements of IEC standards

CE marking
UL/CSA certification
IP65
Double insulated polypropylene casing
Screw clamp connection

Schneider Electric - Push Buttons

Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, 3A I th ;250Vdc, 0.27A I th ; 10A I th allowing electrical cross-interlocking if desired.

Environmental protection to IP65
Fitted cable clamps and stepped cable entry boots
Mechanical interlocking between each pair of opposing pushbutton actuators
Adapters supplied for self-supporting pendant cable, with lug for chain support

Specificaties
Kenmerk Waarde
Series Harmony XACA
Cutout Diameter 22mm
Number of Cutouts 12
Enclosure Colour Yellow
Enclosure Material Polypropylene
For Use With XAC A Operating Heads
IP Rating IP65
Length 680mm
Width 92mm
Depth 70mm
Maximum Operating Temperature +70°C
Minimum Operating Temperature -25°C
4 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
92,57
(excl. BTW)
112,01
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 92,57
Related Products
XB5R series push buttons transmitters. Mounting Diameter: 22 ...
Description:
XB5R series push buttons transmitters. Mounting Diameter: 22 mmMechanical Life: 1000000 cycles.
Control stations for Zones 1 and 2 made ...
Description:
Control stations for Zones 1 and 2 made from anti-static and impact-resistant polymer. Supplied with red, green, yellow and white coloured push-in inserts.
XALD and XALK series offer maximum flexibility with ...
Description:
XALD and XALK series offer maximum flexibility with either complete products or components for customer assembly and they are suitable for a wide variety of applications. High performance and extensive offerPre-assembled productsIP65Wide choice of metal or plastic control stationsFully compatible ...
9001KY and 9001SKY 30 mm control stations are ...
Description:
9001KY and 9001SKY 30 mm control stations are available in two forms: pre-assembled control stations and empty enclosures. Empty enclosures (for customer assembly), empty guarded enclosures (mushroom head operator not included) and stainless steel NEMA 1 flush plates.