Schneider Electric 2NO 2 Push Button Pendant Station 3 A ac, 270 mA dc Yellow, 600V, IP65 2 Black, White

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CZ
Productomschrijving

Standard Pushbutton

Pre assembled double insulated crane pendants for single speed motor applications
Mechanically interlocked between pairs
For light duty Pendant switch see also Stock no 507481

Schneider Electric - Push Buttons

Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, 3A I th ;250Vdc, 0.27A I th ; 10A I th allowing electrical cross-interlocking if desired.

Environmental protection to IP65
Fitted cable clamps and stepped cable entry boots
Mechanical interlocking between each pair of opposing pushbutton actuators
Adapters supplied for self-supporting pendant cable, with lug for chain support

Specificaties
Kenmerk Waarde
Series Harmony XACA
Number of Cutouts 2
Push Button Marking Down Arrow, Up Arrow
Push Button Colour Black, White
Enclosure Colour Yellow
Number Of Push Buttons 2
Contact Configuration 2NO
IP Rating IP65
Maximum DC Voltage 600V
Maximum AC Voltage 600V
Maximum Current 3 A ac, 270 mA dc
Maximum Operating Temperature +70°C
Terminal Type Screw
Minimum Operating Temperature -25°C
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
5 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
77,82
(excl. BTW)
94,16
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 77,82
Related Products
A range of Schneider accessories from the Harmony ...
Description:
A range of Schneider accessories from the Harmony XAC series for use with pendant control stations. Suitable for all station types.
Pendant control stations for auxiliary circuits. Designed for ...
Description:
Pendant control stations for auxiliary circuits. Designed for mechanical handling, these highly robust pendant control stations comply with the safety requirements of IEC standards. CE markingUL/CSA certificationIP65Double insulated polypropylene casingScrew clamp connection.
Pendant control stations for custom 22 mm push ...
Description:
Pendant control stations for custom 22 mm push buttons with pre-assembled and un-assembled versions and various hole size options between 2 - 12 holes.
Pistol-grip pendant control stations for simple hoisting applications. ...
Description:
Pistol-grip pendant control stations for simple hoisting applications. All opposing pairs of switches are mechanically interlockedSwitching current 10AIP65 ratedHoist and lowering functions only.