Schneider Electric 2NO/NC 3 Push Button Pendant Station 3 A ac, 270 mA dc Yellow, 600V, IP65 3 Black, Red, White

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Pistol Grip

Pistol-grip pendant control stations for simple hoisting applications.

All opposing pairs of switches are mechanically interlocked
Switching current 10A
IP65 rated
Hoist and lowering functions only

Schneider Electric - Push Buttons

Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, 3A I th ;250Vdc, 0.27A I th ; 10A I th allowing electrical cross-interlocking if desired.

Environmental protection to IP65
Fitted cable clamps and stepped cable entry boots
Mechanical interlocking between each pair of opposing pushbutton actuators
Adapters supplied for self-supporting pendant cable, with lug for chain support

Specificaties
Kenmerk Waarde
Series Harmony XACA
Number of Cutouts 3
Push Button Marking Down Arrow, E-Stop, Up Arrow
Push Button Colour Black, Red, White
Number Of Push Buttons 3
Enclosure Colour Yellow
Contact Configuration 2NO/NC
IP Rating IP65
Push Button Actuation Latching
Maximum DC Voltage 600V
Maximum AC Voltage 600V
Terminal Type Screw
Minimum Operating Temperature -25°C
Maximum Current 3 A ac, 270 mA dc
Maximum Operating Temperature +70°C
5 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
65,55
(excl. BTW)
79,32
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 65,55
Related Products
The Schneider Harmony XVPC series is a visual ...
Description:
The Schneider Harmony XVPC series is a visual and audible signalling tower used for indicating the various states of operation for a device or installation, such as: start, stop machine, no material, call technical staff, and fault signalling.These signal towers ...
Pendant control stations for auxiliary circuits. Designed for ...
Description:
Pendant control stations for auxiliary circuits. Designed for mechanical handling, these highly robust pendant control stations comply with the safety requirements of IEC standards. CE markingUL/CSA certificationIP65Double insulated polypropylene casingScrew clamp connection.
Pendant control stations are used on hoists, overhead ...
Description:
Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, ...
Pendant control stations are used on hoists, overhead ...
Description:
Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, ...