Schneider Electric 4NO/NC 3 Push Button Pendant Station 3 A ac, 270 mA dc Yellow, 600V, IP65 3 Black, Red, White

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Pistol Grip

Pistol-grip pendant control stations for simple hoisting applications.

All opposing pairs of switches are mechanically interlocked
Switching current 10A
IP65 rated
Hoist and lowering functions only

Schneider Electric - Push Buttons

Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, 3A I th ;250Vdc, 0.27A I th ; 10A I th allowing electrical cross-interlocking if desired.

Environmental protection to IP65
Fitted cable clamps and stepped cable entry boots
Mechanical interlocking between each pair of opposing pushbutton actuators
Adapters supplied for self-supporting pendant cable, with lug for chain support

Specificaties
Kenmerk Waarde
Series Harmony XACA
Number of Cutouts 3
Push Button Marking Down Arrow, E-Stop, Up Arrow
Push Button Colour Black, Red, White
Number Of Push Buttons 3
Enclosure Colour Yellow
Contact Configuration 4NO/NC
IP Rating IP65
Push Button Actuation Latching
Maximum Operating Temperature +70°C
Maximum Current 3 A ac, 270 mA dc
Terminal Type Screw
Maximum AC Voltage 600V
Maximum DC Voltage 600V
Minimum Operating Temperature -25°C
10 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
5 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
74,94
(excl. BTW)
90,68
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 74,94
Related Products
Pendant control stations are used on hoists, overhead ...
Description:
Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, ...
The ’Intuitive’ pendant station offers dual control from ...
Description:
The ’Intuitive’ pendant station offers dual control from a single pushbutton, the required movement of the thumb reflecting the movement of the load. The design prevents unwanted operation when not in use. Ergonomically designed to fit the shape of the ...
Pendant control stations are used on hoists, overhead ...
Description:
Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, ...
Pendant control stations are used on hoists, overhead ...
Description:
Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, ...