Schneider Electric 4NO/3NC 3 Push Button Pendant Station 3 A ac, 270 mA dc Yellow, 600V, IP65 3 Black, Red, White

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Station with Additional Safety Features

Pre-assembled pendants for common crane applications
Additional safety features to meet the requirements of EN60204-1
Key release, trigger-action mushroom-headed emergency stop pushbutton to meet the requirements of EN418 which actuates dual circuit redundancy to meet categories 3 and 4 of EN954-1 and signalling, if required
Six and eight-way pendants have an "ON" pushbutton

Schneider Electric - Push Buttons

Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, 3A I th ;250Vdc, 0.27A I th ; 10A I th allowing electrical cross-interlocking if desired.

Environmental protection to IP65
Fitted cable clamps and stepped cable entry boots
Mechanical interlocking between each pair of opposing pushbutton actuators
Adapters supplied for self-supporting pendant cable, with lug for chain support

Specificaties
Kenmerk Waarde
Series Harmony XACA
Number of Cutouts 3
Push Button Marking Down Arrow, E-Stop, Up Arrow
Push Button Colour Black, Red, White
Enclosure Colour Yellow
Number Of Push Buttons 3
Contact Configuration 4NO/3NC
IP Rating IP65
Push Button Actuation Latching
Maximum Operating Temperature +70°C
Terminal Type Screw
Maximum Current 3 A ac, 270 mA dc
Maximum DC Voltage 600V
Minimum Operating Temperature -25°C
Maximum AC Voltage 600V
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
33 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
108,78
(excl. BTW)
131,62
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 108,78
Related Products
A range of Schneider accessories from the Harmony ...
Description:
A range of Schneider accessories from the Harmony XAC series for use with pendant control stations. Suitable for all station types.
Pendant control stations for auxiliary circuits. Designed for ...
Description:
Pendant control stations for auxiliary circuits. Designed for mechanical handling, these highly robust pendant control stations comply with the safety requirements of IEC standards. CE markingUL/CSA certificationIP65Double insulated polypropylene casingScrew clamp connection.
The ’Intuitive’ pendant station offers dual control from ...
Description:
The ’Intuitive’ pendant station offers dual control from a single pushbutton, the required movement of the thumb reflecting the movement of the load. The design prevents unwanted operation when not in use. Ergonomically designed to fit the shape of the ...
Pistol-grip pendant control stations for simple hoisting applications. ...
Description:
Pistol-grip pendant control stations for simple hoisting applications. All opposing pairs of switches are mechanically interlockedSwitching current 10AIP65 ratedHoist and lowering functions only.