Schneider Electric NC Emergency Stop Push Button, NO/NC First & Second Push Button 3 Push Button Pendant Station

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Pendant Control Station XAC-A

Pendant control stations for auxiliary circuits. Designed for mechanical handling, these highly robust pendant control stations comply with the safety requirements of IEC standards

CE marking
UL/CSA certification
IP65
Double insulated polypropylene casing
Screw clamp connection

Schneider Electric - Push Buttons

Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, 3A I th ;250Vdc, 0.27A I th ; 10A I th allowing electrical cross-interlocking if desired.

Environmental protection to IP65
Fitted cable clamps and stepped cable entry boots
Mechanical interlocking between each pair of opposing pushbutton actuators
Adapters supplied for self-supporting pendant cable, with lug for chain support

Specificaties
Kenmerk Waarde
Series Harmony XACA
Number of Cutouts 3
Push Button Marking Down Arrow, E-Stop, Up Arrow
Push Button Colour Black, Red, White
Enclosure Colour Yellow
Number Of Push Buttons 3
Contact Configuration NC Emergency Stop Push Button, NO/NC First & Second Push Button
IP Rating IP65
Push Button Actuation Latching
Length 314mm
Terminal Type Screw
Width 80mm
Dimensions 314 x 80 x 70 mm
Maximum DC Voltage 600V
Maximum AC Voltage 600V
Depth 70mm
Maximum Current 3 A ac, 270 mA dc
1 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
72,67
(excl. BTW)
87,93
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 72,67
Related Products
A range of Schneider accessories from the Harmony ...
Description:
A range of Schneider accessories from the Harmony XAC series for use with pendant control stations. Suitable for all station types.
Enclosures featured come with 22mm holes unless otherwise ...
Description:
Enclosures featured come with 22mm holes unless otherwise stated. Blue paint finishControl station enclosures.
The ’Intuitive’ pendant station offers dual control from ...
Description:
The ’Intuitive’ pendant station offers dual control from a single pushbutton, the required movement of the thumb reflecting the movement of the load. The design prevents unwanted operation when not in use. Ergonomically designed to fit the shape of the ...
Pendant control stations are used on hoists, overhead ...
Description:
Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, ...