Schneider Electric Screw Clamp 2NO/NC First & Second Push Button, NO Third & Fourth Push Button 5

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CZ
Productomschrijving

Pendant Control Station XAC-A

Pendant control stations for auxiliary circuits. Designed for mechanical handling, these highly robust pendant control stations comply with the safety requirements of IEC standards

CE marking
UL/CSA certification
IP65
Double insulated polypropylene casing
Screw clamp connection

Schneider Electric - Push Buttons

Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, 3A I th ;250Vdc, 0.27A I th ; 10A I th allowing electrical cross-interlocking if desired.

Environmental protection to IP65
Fitted cable clamps and stepped cable entry boots
Mechanical interlocking between each pair of opposing pushbutton actuators
Adapters supplied for self-supporting pendant cable, with lug for chain support

Specificaties
Kenmerk Waarde
Series Harmony XACA
Number of Cutouts 5
Push Button Marking Down Arrow, E-Stop, Left Arrow, Up Arrow
Push Button Colour Black, Red, White
Push Button Style Rectangular, Round
Number Of Push Buttons 5
Enclosure Colour Yellow
Enclosure Material PP
Contact Configuration NO Third & Fourth Push Button, 2NO/NC First & Second Push Button
IP Rating IP65
Cutout Diameter 40mm
Push Button Actuation Latching
Cable Termination Type Screw Clamp
Length 440mm
Maximum AC Voltage 600V
Maximum DC Voltage 600V
Maximum Current 3 A ac, 270 mA dc
Terminal Type Screw
Depth 70mm
Width 80mm
Maximum Operating Temperature +70°C
Dimensions 440 x 80 x 70 mm
Minimum Operating Temperature -25°C
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
13 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
152,21
(excl. BTW)
184,17
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 152,21
Related Products
A range of IP65 protected components which are ...
Description:
A range of IP65 protected components which are easily and quickly mounted in 16mm diameter holes. Each component can be ordered separately to build the required device. Also available are contact blocks with slow-break positive opening contacts with ’Faston’/solder connections. ...
From Schneider Electric, these XD2 series joystick controllers ...
Description:
From Schneider Electric, these XD2 series joystick controllers are complete units ready for immediate installation. With a chromium plated metal bezel and rubber grip, the XD2 series offers light-touch reliable control in two or four positions. Available either with spring ...
XB4B series push buttons, switches and pilot lights. ...
Description:
XB4B series push buttons, switches and pilot lights. Complete unitsPush buttons, spring return, chromium plated metal bezelSelector switches and key switches with chromium plated metal bezelIlluminated push buttons, spring return, flush push, chromium plated metal bezel.
Flush Green and flush red spring return pushbuttonStop ...
Description:
Flush Green and flush red spring return pushbuttonStop button fitted with 1 N/C contact block, start button fitted with 1 N/O contactEach actuator will accept an additional contact block (see accessories)Double insulatedIP65 ratedPolycarbonate construction.