Single Pole Double Throw (SPDT) Momentary Push Button Switch, IP40, 16mm, PCB

  • RS-stocknr. 248-5324
  • Fabrikantnummer 31-451.036
  • Fabrikant EAO
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CH
Productomschrijving

Illuminated Push Button Switch - EAO 31 Series

The EAO 31 series of illuminated push button switches are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions.
The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting.
Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor.
All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance.

Various configurations available including low level or snap action elements, momentary or maintained switching actions and normally closed or normally open contacts
Raised button profile
Self-extinguishing switch and actuator housing material
Class II compliant
Electric strength 2500Vac 50Hz for 1 minute between all terminals and earth, as per IEC 60512-2-11

Note

To make a complete illuminated switch you will need the switch, a lens and a filament lamp or LED.
For the EAO 31 series of indicators see stock number 248-5368 typically.
For the EAO 31 series of lenses see stock numbers 749-2611 or 248-5425 or 248-5374 typically.
For the EAO 31 series tool kit see stock number 248-5481.
For a suitable filament lamp see stock number 655-9211 typically.
For a suitable white single chip LED see stock number 225-997 typically.

Standards

EN 61058

Specificaties
Kenmerk Waarde
Switch Operation Momentary
Mounting Type PCB
Illuminated Yes
Contact Configuration Single Pole Double Throw (SPDT)
Panel Cut Out Size 16 (Dia.)mm
Panel Cut Out Diameter 16mm
IP Rating IP40
Contact Current Rating 100 mA @ 42 V
Actuator Shape Rectangular
Terminal Type Through Hole
Actuator Type Button
16 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
27,71
(excl. BTW)
33,53
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 27,71
10 - 49
€ 23,89
50 - 99
€ 22,38
100 +
€ 20,70
Related Products
Range of illuminated panel-mounted switches available in square, ...
Description:
Range of illuminated panel-mounted switches available in square, rectangular and circular momentary or latching versions. Square or rectangular lamp terminals are also available. Suitable lamps: T5·5, see the Optoelectronics / Indicators section. Each switch is supplied with one contact block ...
Momentary action P9 series push button switches feature ...
Description:
Momentary action P9 series push button switches feature a contoured dome style push button in either a low button profile or a high button profile with a threaded case for hex nut mounting and a short behind panel depth of ...
The LB Series of illuminated pushbutton lights have ...
Description:
The LB Series of illuminated pushbutton lights have a light diffusion and filtering system designed specifically for these products. They produce bright full illumination with front panel relamping. Spot illuminationSuper bright LED'sStainless steel clipsLatchdown featureSnap action contact mechanismCombination ...
Robust pushbutton switch suitable for use in harsh ...
Description:
Robust pushbutton switch suitable for use in harsh environments - IK07 shock resistance (DIN EN 50102)Stainless steel housing (anodised aluminium for colour housed versions) and momentary actuator - IP67 protection for front side contact areaActuator with 4.5N operating force and ...