BEL POWER SOLUTIONS INC 3.3 V dc, 5 V dc, ±12 V dc 2 A, 5.5 A, 40 A Switch Mode Power Supply 90 → 264V ac Input,

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

BEL POWER SOLUTIONS INC Rack Mount AC-DC Power Supplies

The BEL POWER SOLUTIONS INC AC-DC switch-mode power supply has a four output voltage rating of 3.3VDC, 5VDC, 12VDC and -12VDC. It has a power rating of 250W. These power supplies offer high power density in plug-in modules that meet the requirements of the PICMG power interface specification for CompactPCI systems.
Note:
250W with 400l/min forced air cooling.
Power derating above 50°C is 2.5% per °C.

Features and Benefits

Output current ratings of 2A, 5.5A and 40A
4 high current outputs with flexible load distribution
47-pin connector, type positronic
Extremely high efficiency and high power density
Hot-swap capability
Inhibit and enable inputs
Input good and power supply fault LED indicators
Integrated O-ring FETs/diodes for true redundancy
Low inrush current
Over temperature, over voltage, over current, and over power protection
Remote sense lines
Single-wire current share function for 3 outputs
Wide range DC or AC input with PFC

Applications

Aerospace
Communications
Industry
Military

Certifications

cCSAus certified
CE certified
EN60950
UL 1950 approved

Specificaties
Kenmerk Waarde
Load Regulation -380 mV, ±10 mV, ±30 mV
Input Voltage 90 → 264V ac
Output Voltage ±12 V dc, 3.3 V dc, 5 V dc
Output Current 2 A, 5.5 A, 40 A
Power Rating 250W
Number of Outputs 4
Mounting Type Rack Mount
Type Switch Mode
MTBF 279000h
Line Regulation 10mV
Ripple And Noise 5mV Pk-Pk
Weight 800g
Width 128.7mm
Minimum Temperature -25°C
Depth 40.6mm
Length 162.5mm
Maximum Temperature +50°C
17 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
384,93
(excl. BTW)
465,77
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 384,93
5 - 9
€ 365,68
10 - 24
€ 346,44
25 +
€ 327,19
Related Products
The Convert Select series are DIN Rail mountable ...
Description:
The Convert Select series are DIN Rail mountable DC-DC and AC-DC converters. They have power factor correction with low harmonic distortion, negligibly low inrush current, high immunity to transients and surges, and low electromagnetic emissions. Internal protection circuits such as ...
The Bel Power Solutions Inc. W series switch-mode ...
Description:
The Bel Power Solutions Inc. W series switch-mode power supply is dual output primary controlled AC-DC or DC-DC flyback converter with a constant switching frequency of 130kHz. Its high-efficiency results from the power-factor-corrected, single-step conversion of the input voltage to ...
Power factor 0.93, harmonics IEC/EN 61000-3-2Emissions according to ...
Description:
Power factor 0.93, harmonics IEC/EN 61000-3-2Emissions according to CISPR 22/EN 55022High efficiencyShort term output peak power capabilitiesIndependently regulated outputsOutputs, no load, overload, and short circuit proofExtremely small case sizeLoad regulation (10-100%) - 1.5% Vo nom.
MPB125 & MPB150 series are single and dual ...
Description:
MPB125 & MPB150 series are single and dual output ac-dc power supplies that incorporates high efficiency, high power density and active power factor correction (PFC).Suitable for use in networking, data communications, commercial and industrial applications. These single output models deliver ...