Mounting Block for use with Side Panel Cover

  • RS-stocknr. 173-252
  • Fabrikantnummer 3684.234
  • Fabrikant Rittal
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Mounting Blocks

For mounting Covers to the subrack side plates

Each or Unit is a pack of 10 x Mounting blocks: Die- cast Aluminium, nickel plated

Note

Also required: fixing screws, M3 x 6, pack of 100, Stock No. 173-268

Caution

For maximum EMC protection, the following number of mounting blocks should be used, depending on the subrack depth:
Side Plate depth of 185 mm: 4 blocks
Side Plate depth of 245 mm: 10 blocks
Side Plate depth of 345 mm: 16 blocks

Ripac Vario and EMC Sub-Racks

A universal, flexible, sub-rack range, capable of EMC upgrade, for mounting Euroboards and double Euroboards and plug-in modules, in 482.6mm (19”) racks.

Specificaties
Kenmerk Waarde
Type Mounting Block
For Use With Side Panel Cover
Quantity 10
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
10,27
(excl. BTW)
12,43
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 10,27
10 - 14
€ 9,86
15 +
€ 9,43
Related Products
Removable top cover6, 7, 9U cases have a ...
Description:
Removable top cover6, 7, 9U cases have a different side panel construction to accommodate heavier equipmentShell handles can be replaced by folding handles, 50kg capacity (6, 7, 9U only)Folding feet can be fitted instead of standard anti-skid feet anthracite grey ...
Accommodates PCBs (horizontally) or non-standard components on a ...
Description:
Accommodates PCBs (horizontally) or non-standard components on a chassisExtruded aluminium constructionSlotted side panels to fix chassis plates at variable heights and depthsHF-shielding can be fittedProtection IP20 to IEC/EN 60529 (with closed covers)Side panels: extruded aluminium natural finish, Front panel: ...
Accommodates PCBs (horizontally) or non-standard components on a ...
Description:
Accommodates PCBs (horizontally) or non-standard components on a chassisExtruded aluminium constructionSlotted side panels to fix chassis plates at variable heights and depthsHF-shielding can be fittedProtection IP20 to IEC/EN 60529 (with closed covers)Side panels: extruded aluminium natural finish, Front panel: ...
Suitable for all sub racks and casesFor Euro-board ...
Description:
Suitable for all sub racks and casesFor Euro-board format board sizes - 100x160mm/100x220mm – 3U; 233.5 x 160mm/233.5 x 220mm – 6UAdditional boards can be mounted on guide rails fitted into the coversSide panels have grooves for the insertion of ...