Pycom SiPy IoT RCZ1/3 Bluetooth Smart (BLE), SigFox, WiFi Development Board

  • RS-stocknr. 125-9533
  • Fabrikantnummer SiPy RCZ1 & RCZ3
  • Fabrikant Pycom
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Pycom SiPy MicroPython WiFi/Bluetooth/Sigfox Development Board

The SiPy is a MicroPython enabled WiFi, Bluetooth and Sigfox development board designed specifically for IoT applications. At its heart is the Espressif ESP32 System on Chip (SoC) featuring a dual-core microcontroller, WiFi, Bluetooth, Sigfox and 512 KB RAM. All this power packed into a board measuring just 55 x 20 x 3.5 mm!

Knowledge of Python on a PC or Mac transfers directly to working with MicroPython and SiPy so the learning curve is minimal. Pycom have developed an intuitive API to help you get the most out of your board.

NOTE: An external antenna is required for the SiPy and using without an antenna can damage the device. The Pycom Antenna Kit is recommended and available from RS 125-9535.

Two versions are available depending on your location:

SiPy RCZ1/RCZ3 Europe / Japan / Korea - RS 125-9533
SiPy RCZ2/RCZ4 America, Australia, New Zealand, SE Asia - RS 125-9540

Integrated SoC with a powerful CPU, Bluetooth (Classic and BLE) and WiFi
Up to 1 km WiFi range
Network processor handles the WiFi connectivity and the IPv6 stack leaving the main processor free to run your application
Texas Instruments CC1125 High performance RF transceiver
Internal WiFi and Bluetooth Antenna and U.FL connector for external Sigfox antenna
2 x UART, 2 x SPI, I2C, I2S, micro-SD card, 8 x 12-bit ADCs, Up to 24 GPIO
WS2812 RGB multi-colour LED
Reset and RF switches
Compatible with standard breadboards using headers (RS 102-9147). Pycom offer an expansion board (RS 125-9534) featuring a micro-USB connector, button, LED and battery connector.
ULP-coprocessor monitors GPIOs, ADC channels and internal peripherals during deep-sleep mode while only consuming 25 uA
Size: 55 x 20 x 3.5 mm
Operating temperature: -40°C to 85°C

Power

Input: 3.3 V to 5.5 V
WiFi: 12 mA in active mode, 5 uA standby
SiPy RCZ1/RCZ3 Europe / Japan / Korea: 17 mA in Rx mode, 47 in Tx mode and 0.5 uA in standby (RS 125-9533)
SiPy RCZ2/RCZ4 America, Australia, New Zealand, SE Asia: 24 mA in Rx mode, 257 mA in Tx mode and 0.5 uA in standby (RS 125-9540)

Sigfox Specifications

Maximum Tx power:
+14dBm (Europe)
+22dBm (America)
+22dBm (Australia and New Zealand)
Node range: Up to 50km
Sigfox pre-certified (October 2016)
Includes 12 months free subscription to the SIGFOX network. Following this we recommend taking out a subscription plan directly with Sigfox to suit your requirements. Please visit sigfox.com for more information.

WLAN (WiFi) - Pycom

Specificaties
Kenmerk Waarde
RF Technology Bluetooth Smart (BLE), SigFox, WiFi
Kit Classification Development Board
Frequency 2.4 GHz, 868 MHz
Kit Name SiPy IoT RCZ1/3
62 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
29,54
(excl. BTW)
35,74
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 29,54
Related Products
The Flash Click is an accessory board for ...
Description:
The Flash Click is an accessory board for adding flash memory. It features EN25F80 with 8 Mbit serial Flash memory module and advanced hardware write-protection mechanisms. It supports high-performance commands for clock frequency up to 75 MHz. The memory is ...
The STM32072B-EVAL evaluation board is designed as complete ...
Description:
The STM32072B-EVAL evaluation board is designed as complete demonstration and development platform for STMicroelectronics ARM cortex-M0 core-based STM32F072VBT6 Micro controller with two I2C, two SPI, four USART, one CAN, 12-bit ADC, 12-bit DAC, two GP comparators, internal 16KB SRAM and ...
This STM32 Nucleo-64 board provides an affordable and ...
Description:
This STM32 Nucleo-64 board provides an affordable and flexible way for users to build prototypes with the STM32F401RET6 microcontroller. Arduino Uno v3 and ST morpho headers expand the functionality with a choice of Shields. The integrated ST-LINK/V2-1 debugger/programmer comes with ...
The STM32746G-EVAL2 Evaluation Board is a complete demonstration ...
Description:
The STM32746G-EVAL2 Evaluation Board is a complete demonstration and development platform for the STMicroelectronics STM32F746NGH6 microcontroller, based on the high-performance ARM® Cortex®-M7 32-bit core with internal 1Mbytes Flash and 320Kbytes + 4Kbytes of backup SRAM.It features four I²C interfaces, six ...