Arrow Electronics ARIS IoT Bluetooth Smart (BLE), Ethernet, Near Field Communication (NFC), WiFi Development Board

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

ARIS Internet of Things Development Board

The ARIS board is a hardware and software Renesas Synergy platform, ready-to-use on developing Internet of Things (IoT) applications.
The system is built around a Renesas Synergy S7 Series high-performance microcontroller.
The accelerometer sensor and the gyroscope supply the position and movement information of the ARIS board via an SPI bus. The relative humidity and temperature sensor provide ambient data via the I²C-bus interface.
A strong focus was directed on the communication and connectivity of the device. The ARIS Board communicates with other devices and the Cloud through Ethernet 10/100, or a USB connection. Wireless connectivity is enabled with Wi-Fi, Bluetooth Low Energy (BLE 4.1/4.2), and Near Field Communication (NFC) protocols.
You can interact and access the GPIO pins, LEDs and push buttons. On the I²C-bus, there is a multitouch resistive touchscreen controller IC with proximity sensing.
The ARIS Board is an all purpose tool with Arduino hardware R3 compatible footprint and connections. Arduino extension shields can be used for implementing extra functionality hardware features.
Development process functions include the on-board J-Link debugger, support for crypto-bootloaders, and Over-the-Air (OTA) firmware updates.
Software development happens at the API layer. The developer can focus on their design with the many features available to them on the ARIS platform.
The Renesas Eclipse Embedded Studio, known as e² Studio is the implemented Integrated Developed Environment (IDE).

Renesas Synergy S7G2 240 MHz ARM Cortex-M4 Microcontroller with 4 MB code flash and 640 kB SRAM memory
512 MB serial QSPI flash (S25FL512S)
256 MBit (32 MByte) SDRAM memory (MT48LC16M16A2)
MicroSD card slot
3-Axis Digital MEMS Accelerometer (ADXL362)
2-axis MEMS gyroscope (ADXRS290)
Digital relative humidity and temperature sensor (Si7013)
Wi-Fi Wireless Connectivity IEEE 802.11 b/g/n (SmartConnect-WINC1500)
Bluetooth Low Energy (BLE 4.1) Module (BGM111)
Multitouch 4/5-Wire Resistive Touchscreen Controller with Proximity Sensing (SX8656IWLTRT)
NTAG I²C, Energy harvesting NFC Forum Type 2 Tag with field detection pin and I²C interface (NT3H1201)

Note

Technical Information and Software Tools: www.reloc.it/products/aris/

Internet of Things (IoT)

Specificaties
Kenmerk Waarde
RF Technology Bluetooth Smart (BLE), Ethernet, Near Field Communication (NFC), WiFi
Kit Classification Development Board
For Use With Application Using BLE & Sensors, Graphical Interface Solution, HTTP Server, RTOS, USB Host Mass Storage, WiFi Solution
Featured Device ADXL362, ADXRS290, BGM111, MT48LC1M16A2, NT3H1201, Renesas Synergy S7, S25FL512S, Si70130, SX8656IWLTRT, WINC1500
Kit Name ARIS IoT
6 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
196,59
(excl. BTW)
237,87
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 196,59
Related Products
Designed for the demands of Telematics and AVL ...
Description:
Designed for the demands of Telematics and AVL (Automatic Vehicle Location) systems, where GPS receivers are supplied with an integrated LNACombines a multi-band GSM (850/900MHz, 1800/1900MHz, 3G and Bluetooth) cellular dipole with a high performance amplified GPS antennaSingle, low profile, ...
From the lab to the field, a single ...
Description:
From the lab to the field, a single high-performance, comprehensive diagnostic device!Large adjustable graphic LCD with bilingual menus (FR, GB).Four 100,000 count digital displays, bargraph, graphic measurement history.Basic accuracy 0.1 %, 200 kHz bandwidth.3 automatically selected measurement terminals, ...
chiliboard M2M (4G) Sandwich by Grinn is based ...
Description:
chiliboard M2M (4G) Sandwich by Grinn is based on the 4G Telit module (with GSM and GPS modem) and is suitable for use with chiliboard and liteboard. Based on 4G Telit module LE910-EUGBands: UMTS 850/900/2100 (EU), LTE FDD (3, 7, ...
The UNI-SDK-RWD Evaluation Kit provides an evaluation platform ...
Description:
The UNI-SDK-RWD Evaluation Kit provides an evaluation platform for MicroRWD low-cost, pin-compatible and host command compatible Proximity Reader modules. Compatible with Proximity reader modules for Hitag 1, Hitag S256/2048, Hitag 2, Mifare 1k/4k/Ultralight, ICODE SLI and EM400X/4102 RFID tags and ...