Analog Devices Evaluation Board for HMC547ALC3 for HMC547ALC3 SPDT Control Switch

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

Evaluation Board for HMC547ALC3 SPDT Switch

An evaluation board from Analog Devices allowing assessment of the HMC547ALC3 SPDT switch. This device is housed in a compact 3x3 mm 16-pad leadless SMT package and features high signal isolation and less than 2 dB insertion loss. The switch is suitable for use from DC up to 28 GHz and requires complementary negative logic control.

• Non-reflective GaAs SPDT switch with 40dB isolation and 2dB mid-band insertion loss
• Wide bandwidth of DC to 28 GHz
• Single +5V supply; Negative (-5V) control logic

RF & Microwave, Analog Devices

Specificaties
Kenmerk Waarde
Kit Classification Evaluation Board
For Use With HMC547ALC3 SPDT Control Switch
Featured Device HMC547ALC3
4 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
217,34
(excl. BTW)
262,98
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 217,34
Related Products
Easy access to the AD7879/AD7879-1, a 12-Bit SAR ...
Description:
Easy access to the AD7879/AD7879-1, a 12-Bit SAR Analogue-to-Digital Converter (ADC) with a synchronous serial interface and low on-resistance switches for driving 4-wire resistive touch screensConnects to any PC USB portSelf-contained evaluation systemTest points for easy access to signalsTouch screen ...
The KSZ9567R is a highly-integrated, IEEE 802.3 compliant ...
Description:
The KSZ9567R is a highly-integrated, IEEE 802.3 compliant networking device that incorporates a layer-2 managed Gigabit Ethernet switch, five 10BASE-Te/100BASE-TX/1000BASE-T physical layer transceivers (PHYs) and associated MAC units, and two MAC ports with individually configurable RGMII/MII/RMII interfaces for ...
The MCP1630 Boost Mode LED Driver Demo Board ...
Description:
The MCP1630 Boost Mode LED Driver Demo Board is a step-up, switch-mode, dc-dc converter used for power LED applications. The demo board provides a 350mA or 700mA constant current source with jumper selection. The operating supply is 9Vdc to 16Vdc ...
SigFox Breakout board is small and consists of ...
Description:
SigFox Breakout board is small and consists of SFM10R1 Sigfox certified Wisol module with antenna. Make data transmission easier by developing prototypes with SigFox LPWan reliable network. • Versatile usages• Vertical single inline package• Simple control by AT commands• Sigfox ...