MikroElektronika GSM2 Click 900 → 1900MHz GSM mikroBus Click Board for Quectel M95

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CS
Productomschrijving

GSM2 click mikroBUS™

The Click accessory modules plug into the MikroBUS sockets in MikroElektronika microcontroller development boards. GSM Click is a compact and easy solution for adding the GSM/GPRS mobile phone standard to your design.

Quectel M95 GSM module
Supports GSM/GPRS 850/900/1800/1900MHz Quad-band frequency
85.6kbps GPRS data transfer
Supports TCP/IP, UDP, FTP and PPP protocols
MikroBUS interface
Audio connector
SIM card socket
SMA antenna connector
Power supply: 3.3V or 5V

Note

Click board comes with the header strips soldered.

Click mikroBUS™ Wireless Communication Boards

MikroElektronika has designed a range of boards to add new functions and enhance the development of your applications using the mikroBUS™ pinout standard socket. All in one click!
Click™ boards can add a range of sensing, Bluetooth, Wi-Fi, extra memory, UART communications, audio and much more functionality to your designs. Some boards also act as extensions for development platforms such as the Beaglebone, Arduino Uno and Raspberry Pi.

Specificaties
Kenmerk Waarde
RF Technology GSM
Kit Classification MikroBus Click Board
Featured Device Quectel M95
Frequency 900 → 1900MHz
Kit Name GSM2 Click
12 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
35,36
(excl. BTW)
42,79
(incl. BTW)
Aantal stuks
Per stuk
1 - 2
€ 35,36
3 - 4
€ 33,59
5 +
€ 31,91
Related Products
The miniature (15mm x 33mm) Sigfox development kit ...
Description:
The miniature (15mm x 33mm) Sigfox development kit (DVK), DVK-SFEU-1-GEVK, allows designers to quickly develop Sigfox connected applications in the RCZ1 region using the AX-SFEU-API SoC solution. The DVK comes with a free two-year Sigfox subscription and is pre-programmed with ...
The Base Board is the host of multiple ...
Description:
The Base Board is the host of multiple hardware combination of Shield (Sensor and/or Actuators and Connectivity ) defined for the IoT application hardware implementation. Physical connectors to the shield include Pmod and Arduino format. The base board is also ...
The SDRplay RSPduo is a dual-tuner wideband full ...
Description:
The SDRplay RSPduo is a dual-tuner wideband full featured 14-bit SDR which covers the entire RF spectrum from 1kHz to 2GHz giving 10MHz of spectrum visibility. Combined with the power of readily available SDR receiver software you can simultaneously monitor ...
Seeed’s LTE CAT.1 Pi HAT is an open ...
Description:
Seeed’s LTE CAT.1 Pi HAT is an open source cellular extension modem for Raspberry Pi, based on u-blox LARA-R2xx series. It compatible with Raspberry Pi 1 Model B+ and later versions.LTE CAT.1 Pi HAT is designed for LTE Category 1 ...