SparqEE Shield for Arduino

  • RS-stocknr. 811-0723
  • Fabrikantnummer ShieldAv1-0
  • Fabrikant SparqEE
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

SparqEE Arduino Adapter Shield

The ShieldAv1.0 is a shield or adapter that connects the SparqEE CELLv1.0 to an Arduino processor board without any additional wiring. In addition, breakouts are provided for the four additional SparqEE boards (ACCELv1.0 (811-0720), GPSv1.0 (811-0732), POWERv1.0 (811-0726), RELAYv1.0 (811-0739)) if the user prefers to directly connect any of those boards to the shield

LEDs for CELLv1.0 status lin
Dimensions: 55 x 70mm
Weight: 0.70oz
Operating temperature range: -40 to +85°C

Note

Please visit the following websites for further information:

SparqEE: http://sparqee.com/
Arduino Shield: http://www.sparqee.com/products/sparqee-shielda
Forum: http://www.forum.sparqee.com/
Code/Drivers: http://www.sparqee.com/code-cell/

Specificaties
Kenmerk Waarde
Kit Classification Shield
For Use With Arduino
86 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
7,51
(excl. BTW)
9,09
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 7,51
Related Products
The ARIS board is a hardware and software ...
Description:
The ARIS board is a hardware and software Renesas Synergy platform, ready-to-use on developing Internet of Things (IoT) applications. The system is built around a Renesas Synergy S7 Series high-performance microcontroller. The accelerometer sensor and the gyroscope supply the position ...
The B-L475E-IOT01A Discovery kit allows users to develop ...
Description:
The B-L475E-IOT01A Discovery kit allows users to develop applications featuring direct connection of wireless IoT sensors to cloud servers. It is supported by a wide range of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs. • STM32L475VG low-power ...
Two eRIC Arduino Shields which allow wireless communication ...
Description:
Two eRIC Arduino Shields which allow wireless communication between Arduino™ boards using proprietary LPRS easyRadio technology. This technology provides considerably greater range and lower power consumption than similar Wi-Fi or Bluetooth devices operating in the overcrowded 2.4GHz bands. An on-board ...
The X-NUCLEO-NFC03A1 is an NFC card reader evaluation ...
Description:
The X-NUCLEO-NFC03A1 is an NFC card reader evaluation board based on the CR95HF 13.56MHz multi-protocol contactless transceiver IC. • CR95HF-VMD5T contactless NFC/RFID Reader/Writer • 47 x 34mm, four-turn PCB antenna loop • Antenna tuning circuit • Operating Frequency: 13.56MHz • ...