Microchip RN1723 WiFi Development Kit 2.4GHz RN-1723-EK

The Microchip RN-1723-EK is an evaluation platform with which users can develop the RN1723 802.11 b/g Wi-Fi Module. Users can access the on-board device directly via USB, or can utilise the UART interface to communicate via an MCU.

The board can be powered through the USB connector or two AAA batteries inserted into the mount on the rear. The latter method is particularly useful for testing and developing the RN1723 battery powered IoT applications.

RN1723 802.11b/g Wi-Fi Module
Ultra-low power: 4 μA sleep, 40 mA Rx, 180 mA Tx at +10 dBm
Complete on-board TCP/IP networking stack
Configurable transmit power: 0 to +12 dBm
UART hardware interface
Up to 1 Mbps data rate over UART
Powered by 2 x AAA batteries or via USB cable
Push buttons for AP/WPS mode and reset signals
Supports both Adhoc and SoftAP mode (including SoftAP for Android)
10 general-purpose digital I/O pins
8 analogue sensor interfaces; configurable sensor power outputs 0 to 3.3V DC
Real-time clock for wakeup and time stamping
Wi-Fi Alliance certified for WPA2-PSK
FCC/CE/IC certified and RoHS compliant

1 x RN1723 802.11b/g Wi-Fi Development Kit
1 x USB Cable

WLAN (Wireless Local Area Network) - Microchip Technology