Adafruit PN532 NFC/RFID ControllerShield

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Adafruit PN532 NFC/RFID Controller Shield for Ardunio

This controller shield is the Adafruit PN532 breakout board which has been remastered into the perfect shield. A great tool for any 13.56MHz RFID or NFC application. The Adafruit NFC shield uses the PN532 chip-set and is what is embedded in almost every phone or device that does NFC. This particular model is highly reliable and excellent quality.

This board/chip uses I2C 7-bit address 0x48
2.1" (53.3 mm) x 4.7" (117.7 mm) and 0.425" (1.1 mm) thick

Controller Shield

4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
3 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
35,41
(excl. BTW)
42,85
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 35,41
5 - 9
€ 34,35
10 +
€ 33,66
Related Products
SigFox Breakout board is small and consists of ...
Description:
SigFox Breakout board is small and consists of SFM10R1 Sigfox certified Wisol module with antenna. Make data transmission easier by developing prototypes with SigFox LPWan reliable network. • Versatile usages• Vertical single inline package• Simple control by AT commands• Sigfox ...
Two eRIC Arduino Shields which allow wireless communication ...
Description:
Two eRIC Arduino Shields which allow wireless communication between Arduino™ boards using proprietary LPRS easyRadio technology. This technology provides considerably greater range and lower power consumption than similar Wi-Fi or Bluetooth devices operating in the overcrowded 2.4GHz bands. An on-board ...
The X-NUCLEO-NFC03A1 is an NFC card reader evaluation ...
Description:
The X-NUCLEO-NFC03A1 is an NFC card reader evaluation board based on the CR95HF 13.56MHz multi-protocol contactless transceiver IC. • CR95HF-VMD5T contactless NFC/RFID Reader/Writer • 47 x 34mm, four-turn PCB antenna loop • Antenna tuning circuit • Operating Frequency: 13.56MHz • ...
ARIS EDGE board, developed by RELOC for Arrow ...
Description:
ARIS EDGE board, developed by RELOC for Arrow Electronics, is a ready-to-use Internet of Things (IoT) hardware and software platform that enables users to get their IoT applications up and running quickly, exploiting the Renesas Synergy development framework. Based on ...