DesignSpark Raspberry Pi Case, Black

  • RS-stocknr. 103-4300
  • Fabrikantnummer ASM-1900040-21
  • Fabrikant DesignSpark
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

DesignSpark Case for Raspberry Pi 2 Model B, Raspberry Pi 3 Model B and Raspberry Pi Model B+

From DesignSpark a protective cases designed to enclose your Raspberry Pi 2 Model B, Raspberry Pi 3 Model B or Raspberry Pi Model B+ development board. The case has an easy to assemble modular design consisting of a base, cover and end cover plate which easily snap together

Raspberry Pi Case Components

Base

The base of the Raspberry Pi case features four non-slip rubber feet for stability and two screw mounting keyholes for wall mounting. There is also an additional locking security screw hole for a more permanent mounting option. The enclosure base contains ventilation holes to dissipate from the enclosed RPi board. LED apertures or light tunnels allow status LEDs to be visible through the enclosure. The base also features an SD card slot and cut-outs for USB 2.0 and 10/1000 Ethernet ports.

Cover

The cover is designed to provide protection to the Raspberry Pi board and other sensitive components. Cut-outs for the connectors are provided along the side of the cover along with a Kensington security lock slot. The top of the cover features ventilation slots to allow dissipation of the heat produced by the RPi board

End Cover Plate

The end cover plate can be mounted either end of the Raspberry Pi case to protect the SD card slot or the USB connector ports. The plate is locked in place by sliding it underneath the rubber foot mounts

Key Features and Benefits

• Suitable for use with Raspberry Pi 2, Raspberry Pi 3 or Raspberry Pi B+
• Easy to assemble snap together modular design
• LED apertures for visibility of power and activity lights
• Cut-outs for ports and connectors
• Keyhole screw mounting holes for wall mounting
• Security screw hole for permanent fixing
• Non-slip rubber feet for stability
• Ventilation slots on cover for heat dissipation
• End cover plate to protect either end of case

Note

The Raspberry Pi development board is not included

Specificaties
Kenmerk Waarde
For Use With Raspberry Pi 2B, Raspberry Pi 3B, Raspberry Pi B+
Colour Black
Cut-Out Type SD Card
16 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
169 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
5,71
(excl. BTW)
6,91
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 5,71
10 - 99
€ 5,58
100 +
€ 5,19
Related Products
These enclosures are machined to accept the popular ...
Description:
These enclosures are machined to accept the popular beagle board and beaglebone black development boards. They are moulded in a choice of black, grey or translucent blue general purpose ABS plastic with a satin textured finish. The enclosure is machined ...
These VESA mounting brackets enable you to mount ...
Description:
These VESA mounting brackets enable you to mount a DesignSpark Raspberry Pi 3 case to the back of a display or monitor using the VESA attachment points. Note: Pi case not included.Each bracket includes a locking clip which can be ...
Pi Camera Box Bundle includes Pi Camera Box ...
Description:
Pi Camera Box Bundle includes Pi Camera Box Case, Magnetic Fish-Eye Lens and Camera Box Wall Mount. The bundle is suitable for housing the Raspberry Pi computer with Pi Camera module. The design prevents damaging the fragile ribbon on the ...
The Phoenix Contact black, polycarbonate electronic housing for ...
Description:
The Phoenix Contact black, polycarbonate electronic housing for PCB’s is a perfect solution for attaching and protecting the B2 and B3 model of Raspberry Pi.The complete Raspberry Pi case includes half-shell housing, side panels with cut out openings for all ...