Megger RCDT 310 RCD Tester 500mA AC Selective, DC Selective CAT III 300 V RS Calibration

  • RS-stocknr. 711-9007
  • Fabrikantnummer RCDT310
  • Fabrikant Megger
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

RCDT310 & RCDT320 RCD Testers

Two RCD testers that comply with EN61557 for testing, measuring or monitoring of protective measures.

Tests 30mA, 100mA, 300mA and 500mA rated RCDs
1/2x I, I, 5x I tests standard, DC and selective RCDs
0° or 180° polarity tests on all RCDs
Selective breakers have a time delay in tripping. When selected, trip test times are extended and a 30s delay is allowed between the measurement of the fault voltage and the application of the test current
Selectable touch voltage inhibit and touch voltage display on the analogue bargraph
300Vac (25 to 45Hz) voltage measurement range
Clear 20mm high digit LCD display with analogue arc bargraph
Tough rubber armoured case with self-contained display cover that locks away underneath the instrument during use
Safety input terminal interlock - prevents unsafe connection of test leads
Safety lock-out prevents the test from operating when the circuit voltage is >300V

RCDT320 model additional features

10mA/1A RCD extended test capability
Backlit display and range selection ideal for low light environments
Ramp Test measures & displays the actual trip current of an RCD. Ideal for diagnosing nuisance tripping of RCDs
Auto testing allows remote testing from the RCD under test. The RCDT320 will automatically perform a 1//2 I, I and 5I test at both 0°and 180°. When the RCD trips the user resets it and the tester proceeds to the next test automatically. All results are displayed at the end of the test
25 to 450Hz Frequency measurement range
Optional 2-wire test leads supplied

3-phase safe - Meets the requirements of BSEN 61010-1 for safe connection to a 440V Installation Category III supply (300V phase to Earth)
Weatherproof to IP54
Dimensions (WxHxD): 190 x 75 x 140mm; Weight 980g

Note

RS is an authorised Megger distributor. Purchased though RS this product is eligible for the Megger extended 3 Year warranty

Supplied with

Instructions, Mains plug test leads, 8 AA alkaline batteries, neck strap.

Specificaties
Kenmerk Waarde
RCD Test Current 500mA
RCD Test Type AC Selective, DC Selective
Display Type LCD
Safety Category CAT III 300 V
Calibrated RSCAL
Battery Type Rechargeable NiCd, Rechargeable NiMH
Battery Life 2000 Tests
Power Source Battery
Dimensions 203 x 148 x 78mm
Weight 980g
Height 78mm
Length 203mm
Maximum Operating Temperature +40°C
Minimum Operating Temperature -5°C
Model Number p RCDT 310
Safety Category Voltage 300V
Width 148mm
7 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
545,50
(excl. BTW)
660,06
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 545,50
Let op:
dit artikel is voorzien van een UK Plug.
Related Products
Combines the advantages of an analogue instrument with ...
Description:
Combines the advantages of an analogue instrument with the safety features and reliability of a digital instrument. 9 DC voltage ranges: 150mV to 1500V6 AC voltages ranges: 5V to 1500V7 DC current ranges: 50μA to 10A6 AC current ranges: 500mA ...
Hirschmann Test and Measurement KUN 30 Au series ...
Description:
Hirschmann Test and Measurement KUN 30 Au series 4mm gold plated brass cable socket which is both shatter-proof and flexible, complete with an insulated coupling for a 4 mm diameter plug and solder connection for a cable with a cross-section ...
Confidently take reliable readings with the True-rms, Fluke ...
Description:
Confidently take reliable readings with the True-rms, Fluke 355 digital clamp meter; the tool of choice for high current clamp-on amp meter measurement up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications. ...
Trumeter bi-directional totalising counters offer a premium feature-packed ...
Description:
Trumeter bi-directional totalising counters offer a premium feature-packed product which is cost-effective. Offers simple installation thanks to screw connections located on the back of the unit. 8 digit LCD display with 9mm character heightFront reset function can be disabled to ...