SP-NO Reed Switch, 500mA 400V ac/dc

  • RS-stocknr. 362-2524
  • Fabrikantnummer 2502-2314-020
  • Fabrikant Assemtech
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Form A & C Reed Switches

These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.

There is a wide selection to choose from. You can select different lengths and each length has various sensitivity options.

Hermetically sealed
Form A (SPNO) or form C (SPCO) ruthenium or rhodium plated contacts
Mechanical Life 108 Operations
For suitable magnets, see stk. no 362-2401 typically

Approvals

UL, CSA

Approvals

UL; CSA

Specificaties
Kenmerk Waarde
Contact Configuration SP-NO
Maximum Switching Current 500mA
Maximum Switching Power 10VA
Maximum Switching Voltage 400V ac/dc
Contact Resistance 150mΩ
Contact Material Rhodium
Maximum Release Time 0.05ms
Operating Time Including Bounce 0.2ms
14 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
1,96
(excl. BTW)
2,37
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 1,96
10 - 24
€ 1,82
25 +
€ 1,65
Related Products
Long overtravel of 2.2mm minimumIP67 sealed with 500mm ...
Description:
Long overtravel of 2.2mm minimumIP67 sealed with 500mm flying leadsSingle pole changeoverChoice of standard plunger or metal leverPolyacetal (POM) actuator and Glass Fibre Reinforced Polyamide (PA 6.6) caseSealedOperating Temperature Range: -40 to + 85°CContact Rating: 250Vac 5A, 125Vac 5A.
EAO Series 82 of robust stainless steel housed ...
Description:
EAO Series 82 of robust stainless steel housed vandal resistant switches. Series 82 have been designed to adhere to IK10 impact resistance & IP67 sealing requirements, making them suitable for exposed public applications. The series 82 are offered with either ...
The M2 Series pushbuton switches are available at ...
Description:
The M2 Series pushbuton switches are available at logic level and power capabilities ideal for various applications. Snap acting contact mechanismSingle unit constructionO-Ring surrounding actuatorUltrasonic weldingEpoxy sealed terminalsBracketed models have crimped bracket legs.
ContactsSilver or gold-plated contacts.Epoxy resin caseSelf-extinguishing epoxy.Actuator styleOver ...
Description:
ContactsSilver or gold-plated contacts.Epoxy resin caseSelf-extinguishing epoxy.Actuator styleOver 30 actuator variations.Insulation between terminal and ground: 4 mm minimum.Prevention of flux entryThe epoxy resin seal on bottom of the switch helps prevent the entry of solder and flux Insulation ...