SPST-NO Reed Switch, 500mA

  • RS-stocknr. 909-2632
  • Fabrikantnummer RI-27AA
  • Fabrikant Assemtech
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: NL
Productomschrijving

Form A & C Reed Switches

These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.

There is a wide selection to choose from. You can select different lengths and each length has various sensitivity options.

Hermetically sealed
Form A (SPNO) or form C (SPCO) ruthenium or rhodium plated contacts
Mechanical Life 108 Operations
For suitable magnets, see stk. no 362-2401 typically

Approvals

UL, CSA

Specificaties
Kenmerk Waarde
Contact Configuration SPST-NO
Maximum Switching Current 500mA
Maximum Switching Power 10W
Contact Resistance 115mΩ
Contact Material Ruthenium on Gold
Maximum Release Time 30µs
Operating Time Including Bounce 0.25ms
AT Value Range 15-25AT
Width 1.8 (Dia.)mm
Length 13.5mm
Dimensions 1.8 (Dia.) x 13.5mm
70 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Bag of 10)
0,96
(excl. BTW)
1,16
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
10 - 90
€ 0,96
€ 9,60
100 - 240
€ 0,751
€ 7,51
250 - 490
€ 0,648
€ 6,48
500 - 1990
€ 0,504
€ 5,04
2000 +
€ 0,479
€ 4,79
*prijsindicatie
Related Products
Reed-type contacts for applications in inverter (reference CG ...
Description:
Reed-type contacts for applications in inverter (reference CG 21) or normally open (references IA 21 and IA 85) mode.
From Coto, this RI-23 Series micro dry-reed switch ...
Description:
From Coto, this RI-23 Series micro dry-reed switch contains two magnetically actuated reeds. Hermetically sealed in a glass envelope, the RI-23 Series reed switch boasts an excellent life expectancy and is suitable for general purposes. Available in standard (RI-23B) and ...
These dry-reed switches have been hermetically sealed in ...
Description:
These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a ...
These dry-reed switches have been hermetically sealed in ...
Description:
These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a ...