OPB720A-06Z Optek, Screw Mount Reflective Sensor, Open Collector Output

  • RS-stocknr. 414-175
  • Fabrikantnummer OPB720A-06Z
  • Fabrikant Optek
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MX
Productomschrijving

OPB720A and OPB720B Long Range Reflective Switch

The OPB720 Series has a logical output that switches from a high level with a reflective target, to a low level with no reflective target. With the addition of hysteresis, the sensor minimises switching oscillations on the output. The sensor distance that can be achieved is very dependent on the type of material used for the target

Recognises objects as small as 2mm
Can be used in either reflective or interruptive mode
Ambient light rejection of <100k Lux
TTL/CMOS compatible
Cable length: 990mm
Size: 27.94 x 8.38 x 17.15mm
Applications: conveyer-belt package recognition, personnel movement recognition, near-focus security systems, wash and soap dispensing stations and product dispensing services

Reflective Optical Sensors, Optek

Specificaties
Kenmerk Waarde
Peak Sensor Distance 152mm
Output Device Open Collector
Number of Channels 1
Number of Pins 3
Mounting Type Screw Mount
Dimensions 17.15 x 8.38 x 27.94mm
Height 27.94mm
Length 17.15mm
Maximum Operating Temperature +50°C
Minimum Operating Temperature 0°C
Width 8.38mm
Operating Temperature Range 0 → +50°C
17 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
13,74
(excl. BTW)
16,63
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 13,74
5 - 9
€ 11,41
10 - 24
€ 11,08
25 +
€ 10,79
Related Products
Motion sensor using the 24GHz Microwave Doppler Antenna, ...
Description:
Motion sensor using the 24GHz Microwave Doppler Antenna, RF circuit, IF amp, MCU and voltage regulator are integrated in a small package (14 x 20.4 x 8.8mm) Communication with PC/MCU is available by UART interface and stand-alone operation is also ...
The Broadcom optocoupler is an HCNW4502 series single-channel, ...
Description:
The Broadcom optocoupler is an HCNW4502 series single-channel, high-speed optocoupler. It uses an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output transistor collector ...
GP2S60 is a compact-package, phototransistor output, reflective photointerrupter, ...
Description:
GP2S60 is a compact-package, phototransistor output, reflective photointerrupter, with emitter and detector facing the same direction in a molding that provides noncontact sensing. The compact package series is a result of unique technology, combing transfer and injection molding, that also ...
A range of distance measuring sensors from Sharp ...
Description:
A range of distance measuring sensors from Sharp utilising infrared emitters and photo-detectors with integrated signal processing circuitry. The devices are available with either analogue or switched (digital) outputs and include both fixed and variable distance sensors. Mounting styles include ...