GP2A25J0000F Sharp, SMT Reflective Sensor, Photointerrupter Output

  • RS-stocknr. 146-0725
  • Fabrikantnummer GP2A25J0000F
  • Fabrikant Sharp
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

GP2A25J0000F Series are OPIC output, reflective photointerrupters with emitter and detector facing the same direction in a molding that provides non-contact sensing. This family of devices uses light modulation to reduce the affects of disturbing light, and the sensor is optimized to work in the selected focal distance. A 3-pin connector is included to allow remote-mount or off-board designs.

Reflective with OPIC Light Modulated Output
Highlights Includes additional screw fi xing holes, Position pin to prevent mis-alignment, Long focal distance
RoHS directive compliant

Specificaties
Kenmerk Waarde
Peak Sensor Distance 9 (Detection) mm, 27 (Non-Detection) mm
Output Device Photointerrupter
Mounting Type Surface Mount
Dimensions 39.8 x 9 x 8.65mm
Height 8.65mm
Length 39.8mm
Maximum Operating Temperature +60°C
Minimum Operating Temperature -10°C
Width 9mm
Operating Temperature Range -10 → +60°C
Output Signal Type Analogue
1200 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Bag of 100)
3,417
(excl. BTW)
4,135
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
100 - 100
€ 3,417
€ 341,70
200 - 400
€ 3,246
€ 324,60
500 +
€ 2,86
€ 286,00
*prijsindicatie
Related Products
The AMA/AMBA series of MA motion sensors are ...
Description:
The AMA/AMBA series of MA motion sensors are designed to detect humans using infrared rays - irrespective of reflection, material or cleanliness. Other advantages of the AMBA/AMA series include thinner versions for easier device installation, built-in oscillation for certain versions, ...
A range of distance measuring sensors from Sharp ...
Description:
A range of distance measuring sensors from Sharp utilising infrared emitters and photo-detectors with integrated signal processing circuitry. The devices are available with either analogue or switched (digital) outputs and include both fixed and variable distance sensors. Mounting styles include ...
The OPB720 Series has a logical output that ...
Description:
The OPB720 Series has a logical output that switches from a high level with a reflective target, to a low level with no reflective target. With the addition of hysteresis, the sensor minimises switching oscillations on the output. The sensor ...
High sensitivityBuilt-in infrared emitting diode, photodiode and signal ...
Description:
High sensitivityBuilt-in infrared emitting diode, photodiode and signal processing circuitCompact, single-shot detection of house dustOutput: Analog voltage.