Bosch Rexroth Replacement Hydraulic Filter Element R928006863, 10μm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Bosch Rexroth Replacement Filter Elements

A range of replacement filter elements from Bosch Rexroth for use with their Hydraulic filter range. The filter elements are manufactured from glass fibre material and suitable for filtering contaminants down to a particle size of 10 microns

Features and Benefits

Attainable oil cleanliness up to ISO 12/8/3 (ISO 4406)
High dirt holding capacity and filtration performance due to multi-layer glass fiber technology and simultaneously a low initial pressure differential (ISO 3968)
Filter elements with high pressure differential stability
Max pressure differential 30bar

Bosch Rexroth Filtration

Specificaties
Kenmerk Waarde
Manufacturer Series 350
Filtration Size 10µm
Maximum Operating Pressure 30 bar
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
7 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
155,31
(excl. BTW)
187,93
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 155,31
5 - 9
€ 149,10
10 +
€ 142,88
Related Products
Cap allows the movement of air through the ...
Description:
Cap allows the movement of air through the cap filter element, thus preventing dust from being drawn into the reservoir as the fluid level fluctuates. • Suitable for use with mineral oils• Maximum flow rate 455 L/min• 70 μm filter• ...
Applications:Deck and mobile cranesForwardersHydraulic pressesMarine steering unitsPower packsExcavatorsHarvestersReach ...
Description:
Applications:Deck and mobile cranesForwardersHydraulic pressesMarine steering unitsPower packsExcavatorsHarvestersReach stackersWheeled loadersDrilling equipmentIndustrial power unitsWind turbinesPrevents damaging of hydraulic circuits or machinery done by dirt, sand, dust, metal, etc.Lengthens time in between ...
One piece suction strainer for use in hydraulic ...
Description:
One piece suction strainer for use in hydraulic reservoirs and tanks. These elements can be installed directly onto the pump suction line and should always be below the minimum fluid level of the tank. The end caps, inner support cylinder ...
One piece suction strainer for use in hydraulic ...
Description:
One piece suction strainer for use in hydraulic reservoirs and tanks. These elements can be installed directly onto the pump suction line and should always be below the minimum fluid level of the tank. The end caps, inner support cylinder ...