Festo 230V ac 3.7 VA, 6.2 VA Replacement Solenoid Coil, Compatible With VSNC

  • RS-stocknr. 163-7366
  • Fabrikantnummer VACN-N-A1-3A
  • Fabrikant Festo
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Replacement Solenoid Coils

Replacement solenoid coils for use with solenoid valves in pneumatic applications. They have been designed to operate in aggressive conditions and fluctuating temperatures. Replacement coils are obtainable in a range of sizes, IP ratings, temperature ratings, power levels in watts or VA and with or without a plug socket.

Festo Replacement Solenoid Coil

The Festo replacement solenoid coils are used with solenoid valves in pneumatic applications. It belongs to the manufacturer series VACN. These solenoidal coils are used in aggressive conditions and fluctuating temperatures. It has an electrical actuation type. These coils are used in different IP ratings, temperature levels and power levels with or without a socket. It is compatible with VSNC.

Features and Benefits

• Compatibility
• Corrosion resistant
• Durability
• Power consumption of 3.7VA, 6.2VA
• Power supply voltage of 230VAC

Applications

• Pneumatic application

Certifications

• IP65 Rating

Specificaties
Kenmerk Waarde
Manufacturer Series VACN
Compatible With VSNC
Power Supply Voltage 230V ac
Power Consumption 3.7 VA, 6.2 VA
3 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
11,36
(excl. BTW)
13,75
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 11,36
Related Products
Twin socket RCD circuit breaker simply replaces an ...
Description:
Twin socket RCD circuit breaker simply replaces an existing twin socket providing two protected switched socket outlets. The contacts break when power supply is temporarily lost. Power is immediately restored to the appliance/equipment at the end of a power failure. ...
The RS Pro valve range is robust , ...
Description:
The RS Pro valve range is robust , versatile and combines high performances with compact installation dimensions. Solenoid, electrical, mechanical and manual operated. Large flow capacity , short change-over times and low change-over pressure. Available in 3 sizes: 1/8 - ...
The Festo's regulator plate used for valve terminal ...
Description:
The Festo's regulator plate used for valve terminal VTSA and VTSA-F, standard port pattern to 15407-2 up to maximum 6 bar. Its width size is 18mm and selection of pressure gauge is possible. It assembled in any position and used ...
The Festo's push-in Y-connector has standard size, nominal ...
Description:
The Festo's push-in Y-connector has standard size, nominal size 5.9mm and assembled in any position. It has push/pull principle of design structure which has tubing outside diameter 10 mm using PBT housing material. Ambient temperature -10 to 80 °CContainer size ...