Siemens 4 Pole Type B Residual Current Circuit Breaker, 25A 5SM3, 30mA

  • RS-stocknr. 621-9890
  • Fabrikantnummer 5SM3342-4
  • Fabrikant Siemens
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Series 5SM3, Type B SEQUENCE, 4-pole

All-current-sensitive FI circuit breaker for detection of residual AC currents, pulsating and smooth residual DC currents
Increased operating reliability in networks with capacitive impedances based on adapted actuation characteristic
Switch handle and test button may be locked via handle lock
Time-delayed disconnect function in the event of transient stray currents
High current capacity < 3 kA

Applications:

Systems with consumers in which smooth residual DC currents may also occur
Use in three-phase systems

Standards

IEC / EN 61008-1, IEC / EN / 61543

Approvals

VDE 0664 Part 10, VDE 0664 Part 100, VDE 0664 Part 30

Siemens FI circuit breaker

Specificaties
Kenmerk Waarde
Current Rating 25A
Number of Poles 4
Range Sentron
Trip Sensitivity 30mA
Tripping Characteristics Type B
Voltage Rating 400V
Series 5SM3
3 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
940,00
(excl. BTW)
1.137,40
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 940,00
Related Products
ID'clic differential plug-in switches, protected against inadvertent tripping. ...
Description:
ID'clic differential plug-in switches, protected against inadvertent tripping. Used only with Distri'clic XE splitters;Used for protection of "blue tariff" installations. Supply voltage 230 Vac.Standard AC graphs, A for detecting default current with continuous components or Asi for improved immunity.
RCCB for alternating and pulsating DC residual currentsOption ...
Description:
RCCB for alternating and pulsating DC residual currentsOption for power connection from above or belowTunnel terminals with wire protection on both sidesCombination terminal at the bottom for simultaneous connection of busbars and conductorsSafe for fingers and overhands according to DIN ...
Type F RCDs offer the same range of ...
Description:
Type F RCDs offer the same range of protection and functionality as an RCD Type A APR this means that they detect sinusoidal AC currents as well as pulsating DC currents. In addition to this, they are also tested according ...
2-pin or 4-pinDetects AC and pulsing DC fault ...
Description:
2-pin or 4-pinDetects AC and pulsing DC fault currentsSurge-proof up to 250 A and therefore resistant to short leakage currents to earthDIN rail assembly.