Polyester resin PE7501P250G

  • RS-stocknr. 182-6360
  • Fabrikantnummer ERPE7501RP250G
  • Fabrikant Electrolube
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

This two-part clear amber Polyester resin uses an innovative blend of technologies to provide the same performance as polyurethane resins whilst removing the hazardous isocyanates used to cure them. It is a soft, flexible resin which can easily be dug-out in order to remove the cured compound from encapsulated units in order to perform repair work or replace components. Whilst this resin can be easily dug out if required, it will maintain an excellent level of hardness stability over a wide operating temperature range meaning that this does not limit its use. The resin exhibits a low sensitivity to moisture, both during and after cure and maintains an excellent electrical properties. This potting or encapsulation compound is a good choice for units which may need to be reworked or repaired at some stage in their working life, while maintaining good characteristics for a range of possible applications.

Isocyanate free
High performance
Flexible resin
Excellent hardness stability over a wide temperature range (-70 °C to 110°C)
Flexible at temperature extremes
Low moisture sensitivity during and after cure
Exhibits excellent electrical properties
Soft, Dig-outable, aids ease of rework

Specificaties
Kenmerk Waarde
Resin Type Polyester Resin
Minimum Operating Temperature -50°C
Maximum Operating Temperature +110°C
Operating Temperature Range -50 → +100 °C
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
27,51
(excl. BTW)
33,29
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 27,51
15 - 39
€ 26,42
40 +
€ 25,34
Related Products
Aqueous dispersion polymer resin-based assembly bonding mastic.Ultra-powerful tack:100 ...
Description:
Aqueous dispersion polymer resin-based assembly bonding mastic.Ultra-powerful tack:100 kg / m²Very high final resistance: 65 kg / cm²Used for mounting decorative items and long length objects.Can be painted. reduces clearances up to 20 mm.Suitable for use on materials such as ...
Specially formulated filler for wet environments and marine ...
Description:
Specially formulated filler for wet environments and marine applications. Can be over-painted with all marine finishesFor use above and below the water line (not suitable for use on wood below the water line) For continuous use below the waterline, Marine ...