Ohmite 6000E Resistor Washer, For Use With 200 Series Resistor, 210 Series Resistor, 270 Series Resistor, 280 Series

  • RS-stocknr. 892-2517
  • Fabrikantnummer 6000E
  • Fabrikant Ohmite
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MX
Productomschrijving

Ohmite Resistor Washers

Ohmite resistor centering washers and mica insulating washers for use with Ohmite’s wide range of resistors.

The Ohmite 6000E washer can be used with 200, 210 and 270 series resistors from Ohmite. This centring washer is suitable for resistors with a 25 W, 50 W or 75 W power rating. This resistor washer features a 14.3 mm outer diameter and a 7.9 mm inner diameter.

Mounting Hardware

Specificaties
Kenmerk Waarde
Accessory Type Washer
For Use With 200 Series Resistor, 210 Series Resistor, 270 Series Resistor, 280 Series Resistor
Screw Size #10
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 18-12-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 50)
0,323
(excl. BTW)
0,391
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
50 +
€ 0,323
€ 16,15
*prijsindicatie
Related Products
Ohmite 270 Series fixed resistors for applications requiring ...
Description:
Ohmite 270 Series fixed resistors for applications requiring wattage ratings from 12 W to 1000 W. The 270 series of power resistors are equipped with lug terminals suitable for soldering or sturdy bolt connection. When secure mounting is required, the ...
Ohmite mounting brackets to fit inside cores of ...
Description:
Ohmite mounting brackets to fit inside cores of 200, 210 and 270 type resistors and remain in place by spring tension. Standard brackets are plated steel.
Ohmite mounting brackets to fit inside cores of ...
Description:
Ohmite mounting brackets to fit inside cores of 200, 210 and 270 type resistors and remain in place by spring tension. Standard brackets are plated steel.
Ohmite resistor Thru-Bolts, along with centering washers and ...
Description:
Ohmite resistor Thru-Bolts, along with centering washers and mica insulating washers, permit perpendicular mounting of series 200, 210 and 270 type resistors to panels up to 0.25" thick.