Loctıte Yellow Medium Strength, Retaining Compound Methacrylate Liquid Bottle 50 ml, -55 → +150 °C LOCTITE 641

  • RS-stocknr. 496-057
  • Fabrikantnummer 135522
  • Fabrikant Loctite
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IE
Productomschrijving

Loctite® 641 Bearing

For medium strength retaining of bearing, bushes, oil seals, etc.
Increases the reliability of slip-fitted and light press-fit parts preventing fretting, corrosion between bearing surfaces and seals against leakage
Recommended for parts that need subsequent dismantling e.g. bearings and bushes retained by this product can be readily removed from shafts or housings by ordinary tools and methods

Note

Testing should be carried out prior to contact with styrene, acrylic and polycarbonate based plastics to ensure compatibility.

Loctite Retaining Compound Liquid

The Loctite yellow medium strength, 50ml retaining compound liquid is designed to bond cylindrical fitting parts, particularly where disassembly is required for servicing operations. This product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The liquid is composed of methacrylate and provides robust curing performance. It is ideal for parts that need subsequent dismantling. It increases the reliability of slip-fitted and light press-fit parts preventing fretting, corrosion between bearing surfaces and seals against leakage.

Features and Benefits

• Cure time is 6 to 24 hours
• Medium viscosity
• Operating temperature ranges between -55⁰C and 150⁰C
• Prevents corrosion by filling voids
• Reduce the need for close tolerances

Applications

• Homes
• Retention of bearings on shafts
• Retaining of bearing, bushes and oil seals

Certifications

• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Threadlocking and Retainers

Specificaties
Kenmerk Waarde
Trade Name Loctite 641
Application Bonding, Retaining
Anaerobic Yes
Colour Yellow
Chemical Ingredients Methacrylate
Product Form Liquid
Package Type Bottle
Package Size 50 ml
Cure Time 6 → 24 h
Strength Medium
Maximum Operating Temperature +150°C
Minimum Operating Temperature -55°C
Chemical Composition Methacrylate
Operating Temperature Range -55 → +150 °C
22 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
130 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
39,75
(excl. BTW)
48,10
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
€ 39,75
6 - 14
€ 38,16
15 +
€ 37,36
Related Products
Viscous, anaerobic, quick-hardening flange sealantHighly flexible flange sealant ...
Description:
Viscous, anaerobic, quick-hardening flange sealantHighly flexible flange sealant for medium strength bonds, even subject to high temperaturesImmediate sealant at low pressureParticularly suitable for torsion-resistant metal flange, even with low oil contaminationTensile shearing strength on steel: 7 ...
Loctite Hysol® 9492™ is a high temperature resistant, ...
Description:
Loctite Hysol® 9492™ is a high temperature resistant, two component epoxy adhesive. Loctite Hysol 9492 structural bonding, low viscosity High-temperature two-components epoxy adhesiveMix ratio 2:1Offer superior thermal shock resistance, mechanical, electrical and impact resistant properties.
General purpose flange sealantTypical applications include hydraulic and ...
Description:
General purpose flange sealantTypical applications include hydraulic and pneumatic control valves, transmission and engine flanges and marine pipe workThixotropic to avoid run-off during vertical applicationCures rapidly to give a high pressure seal, which resists most industrial fluids and gasesResistant to ...
For medium strength applicationsSuitable for sealing of pipe ...
Description:
For medium strength applicationsSuitable for sealing of pipe fittings and coarse threaded componentsWhen fully cured the sealant can withstand pressures in excess of 200 barIt is suitable for mild steel, cast iron, stainless steel and galvanised pipes.