RF Solutions 006 RF Power Meter 915MHz

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

RF Signal Strength Meter for Sub-1GHz ISM Bands

Compact sized RF signal strength meter that can be used to show the presence and strength of radio signals in the Sub-1GHz ISM frequency bands. Ideal for use when installing a radio remote control system to determine if other RF signals are present (interference) and also validate the signal strength of the radio transmitter to be installed (range expectation).

Selectable Frequency Bands: 315, 433, 868 and 915MHz
Bandwidth: 1MHz
Transmit and Receive modes
8-step LED bargraph display of signal strength in receive mode
Displayed signal strength range: -108 to -40dBm
Sends short pulses at 0dBm RF output power when in transmit mode
Auto shut-off after 1min
Power supply: +9V PP3 battery
Dimensions: 90 x 54 x 27mm
Requires no radio licence

Supply Voltage / Current 9 Vdc / 20 mA (PP3 Battery)
RF Sensitivity -110 dBm (typ.)
Initial frequency accuracy ±50 KHz
Max. R.F. input -20 dBm
3dB bandwidth ±400 KHz
Operating Temperature 0 to +60 °C

Supplied with

Battery, 433MHz antenna

Wireless Modules - RF Solutions

Specificaties
Kenmerk Waarde
Maximum Power Measurement 20dBm
Maximum Frequency 915MHz
Minimum Frequency 315 MHz
Dimensions 90 x 54 x 27mm
Maximum Operating Temperature +50°C
Minimum Operating Temperature 0°C
Height 27mm
Width 54mm
Length 90mm
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
2 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
84,20
(excl. BTW)
101,88
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 84,20
5 +
€ 79,99
Related Products
Solid-state, compact one-piece unit10 bar LED displaySingle flashing ...
Description:
Solid-state, compact one-piece unit10 bar LED displaySingle flashing LED signal for low battery energy reserve alert at 70% dischargeAlternate flashing LED’s alert for battery empty status at 80% dischargeTwo reset methods: Open Circuit Reset (OCR) – upon reconnection to battery ...
The SRP-457 digital process meter is equipped with ...
Description:
The SRP-457 digital process meter is equipped with one measurement input and a standard resistor protection circuit. The meter features a 4-button keyboard for basic programming settings, which is located under the front cover, for greater security. A remote control ...
The e2 classic is a third generation of ...
Description:
The e2 classic is a third generation of wireless electricity energy monitors. It includes an innovative software package so you can track your energy usage on your computer. The e2 energy meter monitors your carbon dioxide emissions allowing you to ...
This PowerLogic Power meter PM3200 offers basic to ...
Description:
This PowerLogic Power meter PM3200 offers basic to advanced measurement capabilities.With compact size and DIN rail mounting, the PM3200 allows mains and feeders monitoring in small electrical cabinets. Combined with current transformers and voltage transformers, these meters can monitor 2-, ...