Panasonic MN63Y1212-E1, RF Transceiver 13.56MHz 1.7 → 3.6 V 8-Pin SON

  • RS-stocknr. 824-0708
  • Fabrikantnummer MN63Y1212-E1
  • Fabrikant Panasonic
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

MN63Y12xx Series NFC RFID Tag ICs

Panasonic MN63Y12xx series RFID Tag ICs with built-in non-volatile memory for use in wireless non-contact near-field communications. The devices feature an encrypted communication function that uses the AES (128 bits) private-key cryptosystem.

The MN63Y1212 (824-0708) has only one RF operational mode which is used for communication between reader/writer and RFID device. This mode allows battery-free operation that uses only the power supplied from the antenna of reader/writer. The MN63Y1213 (824-0717), MN63Y1208 (824-0701) and MN63Y1210A (824-0704) feature two additional operational modes: Serial and Tunnel; these two modes require a suitable supply voltage of 1.7 to 3.6V. Tunnel mode allows communications between reader/writer and host CPU via this IC.

The MN63Y1210A device has a serial interface compatible with both asynchronous UART (up to 38.4 kbps) and clock-synchronous (up to 1 Mbps) applications, and can also operate at 5V when the 5V tolerant I/O and clamp function is turned on.

Built-in 4-Kbit FeRAM non-volatile memory with fast write and low power consumption.
RF interface compliant with JISX6319-4 (212/424 kbps) and ISO/IEC14443 TypeB (106/212 kbps) of the 13.56-MHz contactless IC card standards.
Encryption communication function that uses AES (128 bits) private-key cryptosystem.
Supply voltage range (multi-mode types only): 1.7 to 3.6V
Serial interface compatible with I2C (100 kHz, multi-mode types only)

RFID - Panasonic

Wireless RFID (Radio Frequency Identification) tag products from Panasonic. These devices are used in wireless NFC (Near-field communications) applications for the automated identification and tracking of objects to which the RFID tags are attached or embedded.

Specificaties
Kenmerk Waarde
Number of Operating Bands 1
Maximum Operating Band 1 Frequency 13.56MHz
Modulation Technique ASK
Maximum Operating Supply Voltage 3.6 V
Minimum Operating Supply Voltage 1.7 V
Mounting Type Surface Mount
Package Type SON
Pin Count 8
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
PIC16(L)F153XX 8-bit product family feature essential peripherals like ...
Description:
PIC16(L)F153XX 8-bit product family feature essential peripherals like Intelligent Analog, Core Independent Peripherals (CIPs) and communication combined with eXtreme Low-Power (XLP) for a wide range of low-power applications. Enhanced Mid-range Core with 49 Instruction, 16 Stack LevelsFlash Program Memory with ...
The EZRadio® family of fully integrated, low-power, low-data-rate, ...
Description:
The EZRadio® family of fully integrated, low-power, low-data-rate, cost-effective wireless ICs is designed to meet the needs of OEMs developing ISM applications for the consumer, industrial and automotive markets. The EZRadio ISM band receivers and transmitters target one-way wireless link ...
These AT86RF23x low-power 2.4GHz IEEE 802.15.4 compliant transceivers ...
Description:
These AT86RF23x low-power 2.4GHz IEEE 802.15.4 compliant transceivers are designed for both industrial and consumer high data rate applications. RF Frequency range: 2405 to 2480MHzRF Output Power: up to +4dBm (AT86RF233), up to +3dBm (AT86RF231)Receiver Sensitivity: -101dBm @ 250kbps, 1% ...
The CLRC663 is a highly integrated transceiver device ...
Description:
The CLRC663 is a highly integrated transceiver device for contactless NFC communication. RF Operating Frequency: 13.56MHzOTA Data Rate: up to 848kbpsSupports ISO/IEC 14443A/MIFARE, ISO/IEC 14443B and FeliCaP2P passive initiator mode in accordance with ISO/IEC 18092Supports ISO/IEC15693, ICODE EPC UID and ...