Steel Zinc plated & clear Passivated Hank Rivet Bush, M4

  • RS-stocknr. 505-280
  • Fabrikant Hank
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Hank® Rivet Bushes

Provides a permanent deep tapped hole in thin sheet metals or plastics
Zinc plated, clear passivated steel
Hammer in, or simple press fastening

Note

Dimension A is the fixing hole size, Dimension B is the outside diameter, Dimension C is the depth.

//media.rs-online.com/t_line/L505218-01.gif

Clinchnuts & Thread Inserts

Specificaties
Kenmerk Waarde
Thread Size M4
Fixing Hole Diameter 6.75mm
Body Outside Diameter 9.5mm
Body Depth 3.2mm
Material Steel
Finish Zinc plated & clear Passivated
Thickness of Material Maximum 1.7mm
Thickness of Material Minimum 1.5mm
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
52 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs 1 Bag of 100
15,39
(excl. BTW)
18,62
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 +
€ 15,39
€ 0,154
*prijsindicatie
Related Products
Case hardened mild steel, zinc plated and passivated ...
Description:
Case hardened mild steel, zinc plated and passivated to BS3382 Self-clinching nuts should be assembled using a press tool or similar non-shock device, Hank® bushes can be either pressed into place or may be riveted by hand Unsuitable for use ...
Threaded self-clinching stand-offs available in either through-hole or ...
Description:
Threaded self-clinching stand-offs available in either through-hole or blind-hole versions. Case-hardened, zinc plated mild steel, to BS3382 Stand-off remains in place after installation fastener has been removed.