Cinch Connectors RJ45 RJ Connector Boot, Green 27.5mm Length

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

Strain Relief Hoods

Plastic strain relief hoods for fitting to RJ45 data plugs (type 8//8). Hoods accept standard 4 pair UTP and STP cable and snap onto the rear of the plug preventing excess strain on the cable clamp. The hood extends over the plug latch allowing latch operation but also keeping the latch from snagging on other cables.

Specificaties
Kenmerk Waarde
Interface Type RJ45
Retrofit Capability Yes
Colour Green
Length 27.5mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 16-03-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 100)
0,155
(excl. BTW)
0,188
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 +
€ 0,155
€ 15,50
*prijsindicatie
Related Products
Snap together hoods offering protection and a 'snag ...
Description:
Snap together hoods offering protection and a 'snag free' lever. Can be fitted during assembly or used as a convenient retro-fit coverAvailable in 7 different colours to assist cable identification.
From Telegartner, a series of RJ45 black cable ...
Description:
From Telegartner, a series of RJ45 black cable boots. The RJ45 protective hoods are designed to provide extra protection forthe connector when terminated to cables or patch leads. Available with or without latch protection. Suitable for various cable diameters.
A range of strain relief hood and boots ...
Description:
A range of strain relief hood and boots for use with RJ45 8 pole plugs, available in a range of different colours.• Part number 135-4155 Standard boot Dark grey• Part number 135-4156 Standard boot Orange• Part number 135-4157 Standard boot ...
Plastic strain relief hoods for fitting to RJ45 ...
Description:
Plastic strain relief hoods for fitting to RJ45 data plugs (type 8//8). Hoods accept standard 4 pair UTP and STP cable and snap onto the rear of the plug preventing excess strain on the cable clamp. The hood extends over ...