Phoenix Contact RJ45 RJ Connector Strain Relief, Green 29.5mm Length

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

RJ45 Bend Protection Sleeves

From Phoenix Contact, a series of RJ connector strain reliefs. The bend protection sleeves are for pin inserts and provide the connectors with extra protection supporting the cable during use. The RJ connector strain reliefs have a cable acceptance up to 7 mm and are available in various colour options. See part numbers 921-0164 and 921-0111 for typical pin inserts.

Specificaties
Kenmerk Waarde
Interface Type RJ45
Retrofit Capability Yes
Colour Green
Length 29.5mm
Width 16.6mm
Depth 13.4mm
11 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
0,56
(excl. BTW)
0,68
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 0,56
Related Products
PX0777 Series circular connectors have been designed for ...
Description:
PX0777 Series circular connectors have been designed for safe and secure connection in harsh environments. Whether an internal or external application, this item provides protection for network and system requirements. The sealed plug is water and dustproof when mated with ...
Plastic strain relief hoods for fitting to RJ45 ...
Description:
Plastic strain relief hoods for fitting to RJ45 data plugs (type 8//8). Hoods accept standard 4 pair UTP and STP cable and snap onto the rear of the plug preventing excess strain on the cable clamp. The hood extends over ...
Grey and black plastic strain relief hoods which ...
Description:
Grey and black plastic strain relief hoods which can be fitted to RJ45 plug/cable assemblies at any time during the life of the product. Consists of a butterfly style, one piece moulding which simply snaps around plug and cable. When ...
Plastic strain relief hoods for fitting to RJ45 ...
Description:
Plastic strain relief hoods for fitting to RJ45 data plugs (type 8//8). Hoods accept standard 4 pair UTP and STP cable and snap onto the rear of the plug preventing excess strain on the cable clamp. The hood extends over ...