TE Connectivity RJ Plug Kit With Module, Shell, Strain Relief, Tether

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

RJ point five™ Connector System

The RJ point five connector system is the next generation Ethernet link, offering a higher density cabling solution for those who desire a lower cost per port while maintaining the convenience of a single connector per channel. The port spacing is on a 7mm centreline, occupying half the space of that of traditional RJ45 Ethernet link. The receptacle and cable assembly have been redesigned to eliminate the undesirable RJ45 split pair configuration, resulting in heightened electrical performance. In addition, the latching feature incorporates an easy-to-use lanyard that facilitates up to 96 ports on a single-line card. Due to the density on the receptacle face, the light from the LEDs is transferred out through the cable boot, bringing the port indicator closer to the end user. All models are highly reliable and excellent quality.

Features & Benefits

Approximately double the density offered over the standard RJ45 Ethernet link Same footprint to support both integrated magnetic and non-integrated solutions
Cable assemblies capable of field termination
Product family will support Gigabit speeds of Cat5e UTP cable, and roadmap supports PoE+ and 10 Gb over Cat6a
Receptacle is a modular design to allow for easy and rapid deployment of product extensions
Overall height is 25.25 mm
High density cabling consists of ergonomically friendly lanyard for easy extraction

Receptacles:

LAN category: Cat5e
Contact plating: Gold
Contact material: Phosphor bronze
Connector mounting: PCB, right angle
Termination method: Press fit

Specificaties
Kenmerk Waarde
Kit Type Plug Kit
Kit Contents Module, Shell, Strain Relief, Tether
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 24-04-2020, met een levertijd van 2 à 3 werkdagen.
Prijs 1 Box of 1
9,85
(excl. BTW)
11,92
(incl. BTW)
Box(es)
1 - 9
€ 9,85
10 - 24
€ 8,57
25 - 49
€ 7,80
50 - 99
€ 7,41
100 +
€ 7,21
Related Products
Suitable for wall or loft mountingQuick and easy ...
Description:
Suitable for wall or loft mountingQuick and easy installationKit contents: Mast (H:180 x W:300mm), 10m Coaxial Cable, Fixing Bracket, M5 Nuts, Screws, M5 x 25mm Bolts, M5 X 35mm Bolts, Coaxial Plug, Cable Clips and Wall Plugs.
A major breakthrough in splicing technology, the Fibrlok™ ...
Description:
A major breakthrough in splicing technology, the Fibrlok™ II permanent splicing system is a field operable method of quick and simple fibre splicing. It offers the user a truly cost effective alternative to fusion splicing and does not require any ...
Fibre termination kits with all the necessary parts ...
Description:
Fibre termination kits with all the necessary parts to easily manage fusion spliced fibres within patch panels and termination boxes.,Consists of PG9 input gland, self adhesive management clips, fusion splice sleeves and supports to handle 8 and 24 fibre cables.The ...
The HFBR-0527PZ evaluation kit, from Avago, is designed ...
Description:
The HFBR-0527PZ evaluation kit, from Avago, is designed to facilitate the evaluation of 650nm Versatile Link transmitter: HFBR-1527Z (stock no. 236-795) and receiver HFBR-2526Z (stock no. 236-830). Suitable for data transmission at signal rates of 1 to 125MBd, HFBR-1527Z and ...