MK Electric RJ Frontplate, Logic Plus Series

  • RS-stocknr. 340-7044
  • Fabrikantnummer K182 WHI
  • Fabrikant MK Electric
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Euro Datacom Modules

Snap fit modules for ease of installation
Frontplates available as either 1 gang accepting up to 2 modules or 2 gang accepting up to 4 modules and are compatible with modules from Krone, Mod Tap, AMP, AT& T, ITT Cannon and RW Data
Available in white finish or matt chrome to match the Albany range
White finish has antimicrobial properties which inhibit the growth of infectious diseases
Height 50mm

Note

Stock no. 340-7088 is only suitable for RG58, URM43, URM76 and Belden co-axial cables.

MK Logic Plus Flush Mounting

Stylish, quality, reliable and safe products that incorporate a host of design features which make the installers job easier and quicker. Logic Plus products are made from a high grade thermoset material which has an inherent antimicrobial property. In recent independent tests, the Logic Plus products were equal to, or exceeded, competitor ’Anti-Bac’ products when tested for resistance to MRSA, E-Coli, Salmonella and Klebsiella Pneumoniae.

Specificaties
Kenmerk Waarde
Type Frontplate
Colour White
Length 50mm
Width 50mm
Series Logic Plus
95 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
2,47
(excl. BTW)
2,99
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 2,47
10 - 49
€ 2,34
50 +
€ 2,21
Related Products
From Molex, a series of high density, high ...
Description:
From Molex, a series of high density, high performance, low profile I/O connectors. The Nano-Pitch connectors support multi-protocol high-speed demands needed in the latest industry wire to board applications. With their compact design and 0.50 mm pitch, the Nano I/O ...
With the increasing demand in the home and ...
Description:
With the increasing demand in the home and hotel for Media Solutions, Contactum offers a comprehensive range of Media and Power devices helping the specifier and installer with a host of wiring solutions. Available in 6 different plate finishesModules available ...
Socket modules that snap fit into faceplates and ...
Description:
Socket modules that snap fit into faceplates and adaptor collars. Terminated KATT IDC punch down blocks. Rated to EIA/TIA TSB-40. KATT IDC terminations accept one or two wires in the range 22 to 28 awg. Use punch down toolfor termination ...
IP67 Push Pull panel feed throughInternal cable manager ...
Description:
IP67 Push Pull panel feed throughInternal cable manager will avoid kinksTop or bottom cable entryTransmission in accordance with category 5 ISO/IEC 11 801:2002 and EN 50173-1Panel cut out 21 x 27 mmTemperature Rating: -40 to +70 °C.