Molex 6P6C Way Right Angle Surface Mount RJ11 Socket

  • RS-stocknr. 800-6889
  • Fabrikantnummer 44144-0005
  • Fabrikant Molex
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Molex 44144 / 43743 Series RJ45 Modular Jack SMT Type

The Molex 44144 / 43743 Series Cat3 Modular Jacks, SMT, Right Angle are a Low Profile type.
Stock number 800-6895 is the 8/8 RJ45 with Outboard fitting nail version
Stock number 800-6891 is the 8/8 RJ45 with Flush fitting nail version
Stock number 800-6889 is the 6/6 RJ11 with Flush fitting nail version

Specificaties
Kenmerk Waarde
Gender Female
Number of Ways 6P6C
Mounting Type Surface Mount
Orientation Right Angle
Contact Material Phosphor Bronze
Contact Plating Gold over Tin
Length 13.21mm
Width 11.73mm
Depth 16.89mm
Connector Type Modular Socket
97 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
195 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
1,19
(excl. BTW)
1,44
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 1,19
25 - 49
€ 1,16
50 - 99
€ 1,09
100 - 249
€ 1,02
250 +
€ 0,95
Related Products
H.FL series low profile SMT coaxial receptacle connectors ...
Description:
H.FL series low profile SMT coaxial receptacle connectors with a 3mm height off PCB when mounted. These H.FL series SMT coaxial connectors have a high frequency response of V.S.W.R 1.3 or less from DC, AC 1 to 3000 MHz and ...
The Han-Modular series is a system consisting of ...
Description:
The Han-Modular series is a system consisting of insert modules and frames into which the insert modules fit. These in turn may be fitted to standard Han® housings. The system allows a variety of insert configurations within the one connector ...
PCB SMT mount DC power jacks or barrel ...
Description:
PCB SMT mount DC power jacks or barrel connectors with a low profile design and a 3.9mm barrel diameter. These right angle SMT mount DC power jacks have an internal normally closed single switch and internal pin diameters of 1.05 ...
The Micro Poke-In Assembly is a low profile ...
Description:
The Micro Poke-In Assembly is a low profile SMT connector for Solid State Lighting (SSL) and will accept 24-26 AWG solid cable.