Molex Cat6 8P8C-Way Male RJ45 Connector Cable Mount Shielded

  • RS-stocknr. 800-6826
  • Fabrikantnummer 44915-0011
  • Fabrikant Molex
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Molex RJ45 Cat 6 Modular Plugs with Long Body - 44915 Series

44915 series RJ45 modular plugs suitable for LAN Category 6. These RJ45 modular plugs have a long body design made from clear UL 94V-0 polycarbonate. Shielding provides EMI protection and a strain relief reduces the extraction force on the terminated contacts. Stock number 800-6781 is unshielded
Stock number 800-6826 is shielded
Stock number 800-6829 is shielded with a strain relief

Features and Benefits

• Long body design
• Shielding for EMI protection
• Strain relief for reduced contact extraction force

Product Application Information

These Cat6 RJ 45 modular plugs are ideal for use in voice, data and high-speed networking applications in the consumer, data communications, industrial, medical and networking industries

Specificaties
Kenmerk Waarde
Gender Male
LAN Category Cat6
Mounting Type Cable Mount
Number of Ways 8P8C
Connector Type Modular Plug
Shield Type Shielded
Length 11.69mm
Width 8.18mm
Depth 22.48mm
Contact Material Phosphor Bronze
Contact Plating Gold
Series Number 44915
116 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
121 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
2,73
(excl. BTW)
3,30
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 2,73
15 - 49
€ 2,45
50 - 99
€ 2,41
100 - 249
€ 2,30
250 +
€ 2,07
Related Products
The FlexTack mount from HellermannTyton provides an innovative ...
Description:
The FlexTack mount from HellermannTyton provides an innovative fixing solution for concave or convex low energy surfaces or if drilling a hole is not possible. These cable tie mounts allow greater design freedom and offer uniform stress distribution along with ...
The HellermannTyton cable tie mount is specially designed ...
Description:
The HellermannTyton cable tie mount is specially designed for holding extremely heavy bundles of cables. This cable tie mount is made of high strength polyamide6.6 (PA66MP+)material. It is strong enough to offer secure and efficient fixing for a wide variety ...
Thomas & Betts' 4-way detectable mounting base, 19.1 ...
Description:
Thomas & Betts' 4-way detectable mounting base, 19.1 x 19.1 mm, is for use with cable ties up to 30 lb (13.6 kg). Its design eliminates errors that might otherwise occur in aligning mounting base orientation with wire bundle direction. ...
This detectable support provides a saddle for the ...
Description:
This detectable support provides a saddle for the wire run. Ty-Rap® cable tie is threaded under the bundle and tied in the usual manner. Material choice is between Nylon (NDT suffix on Manufacturer Part Number) and Polypropylene (PDT suffix on ...