ST Robotics Electric 2 Finger Robot Gripper

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

St Robotics Electric Fulcrum Gripper

The St Robotics electric fulcrum gripper is designed to be used for the R12 robot arm. This employs a DC motor and leadscrew to drive the gripper fingers. This unit has specific styled fingers with high friction rubber tips. It is supplied ready fitted to the robot and can not be retrofitted. The option comprises the gripper, connectors on the robot arm and a driver circuit in the robot controller. No extra attachments
are required between the robot and the controller.

Warning
Robot Range: Check delivery on order. *Non-returnable. Conditions apply.
This item is from our Robot Range
At RS we like to offer our customers the widest choice of products possible. These products are specially manufactured by the supplier, on our behalf.
Check the latest delivery when ordering.
Please ensure you have selected the correct product as once your order has been placed it cannot be cancelled or returned
Not available for premium delivery

Features and Benefits

Gripping force is 5N
Total stroke is 30mm (15mm per finger)
Time to close/open is 500 milliseconds
Operating temperature ranges between 0°C and 40°C

Applications

Embedded development
Robotics
Educational institutes
Electronic laboratories

Certifications

ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Gripper Type Electric
End Effector 2 Finger
Number of Fingers 2
Gripping Force 5 (Close Force)N
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 09-10-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
1.273,72
(excl. BTW)
1.541,20
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 1.273,72
Related Products
The EG17 for the R17 robot is a ...
Description:
The EG17 for the R17 robot is a high precision DC powered linear parallel gripper with a large reach and tapped holes enabling customisation.The parallel gripper works by sliding the two jaws together in the form of a parallel gripping ...
The TC12 tool Changer has been exclusively designed ...
Description:
The TC12 tool Changer has been exclusively designed for the ST Robotics R12 robot and does not require an external power source to operate. It comprises of two parts, the robot side and the tool side. • Spring loaded design• ...
Niryo One is a 6-axis open source collaborative ...
Description:
Niryo One is a 6-axis open source collaborative robot manufactured in France. Affordable and easy to use, it has been designed for higher education, vocational training and R&D laboratories. This industrial type robotic arm is based on ROS, Arduino and ...
Niryo One is a 6-axis open source collaborative ...
Description:
Niryo One is a 6-axis open source collaborative robot manufactured in France. Affordable and easy to use, it has been designed for higher education, vocational training and R&D laboratories. This industrial type robotic arm is based on ROS, Arduino and ...