Igus Adapter Robot Gripper

  • RS-stocknr. 126-8971
  • Fabrikantnummer RL-DC-20-GRI-90-01-05
  • Fabrikant Igus
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Igus Gripper Adapters

These gripper adapters from Igus are made from folded sheet-metal and are available in two sizes. They can be screwed onto the last axis of the articulated arm with just a few screws. SLS adapter plates can be used to adapt different grippers (pneumatic, electric, magnetic), suction cups or other actuators.

Features and Benefits

• Modular
• Flexible

Product Application Information

Typical application areas include low-cost robotics.

Igus RobolinkD

Specificaties
Kenmerk Waarde
End Effector Adapter
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
The E1 gripper for the R12 robot arm ...
Description:
The E1 gripper for the R12 robot arm is an electric gripper which uses a DC motor and leadscrew to drive the gripper fingers. The gripper includes stylised fingers with high friction rubber tips enabling it to manipulate items that ...
The EG17 for the R17 robot is a ...
Description:
The EG17 for the R17 robot is a high precision DC powered linear parallel gripper with a large reach and tapped holes enabling customisation.The parallel gripper works by sliding the two jaws together in the form of a parallel gripping ...
The PG17 pneumatic gripper designed for the R17 ...
Description:
The PG17 pneumatic gripper designed for the R17 robot arm uses linear slides which enable high accuracy and repeatability. The basic option comprises of a pneumatic circuit and one gripper with 4 tapped holes for extra mounts enabling the fitting ...
The V12 vacuum gripper for the R12 robot ...
Description:
The V12 vacuum gripper for the R12 robot arm comprises of suction cups and manifold in a single unit making it lightweight and easy to use.With the open ports blocked to maintain air pressure, the vacuum unit can operate with ...