Niryo Electric Electromagnet

  • RS-stocknr. 194-6691
  • Fabrikantnummer Electromagnet
  • Fabrikant Niryo
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: FR
Productomschrijving

Electromagnet

With this tool Niryo One can easily pick and place very small metallic pieces (multiple ones can be picked at the same time), which is very hard with grippers, because grasping such pieces is not practical.

Niryo One is a 6-axis open source collaborative robot manufactured in France. Affordable and easy to use, it has been designed for higher education, vocational training and R&D laboratories. This robotic arm is based on ROS, Arduino and Raspberry Pi, and allows programming with Blockly (similar to Scratch) , Python, C++, Matlab, Modbus TCP/IP, TCP ASCII Server.

Specifications

Weight (on the end effector tool): 43 g
Operating Current / Voltage: 200 mA / 5 V
Picking distance from end effector base: 25 mm

Specificaties
Kenmerk Waarde
Gripper Type Electric
Number of Fingers 1
For Use With Niryo One
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
71,07
(excl. BTW)
85,99
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 71,07
Related Products
The E1 gripper for the R12 robot arm ...
Description:
The E1 gripper for the R12 robot arm is an electric gripper which uses a DC motor and leadscrew to drive the gripper fingers. The gripper includes stylised fingers with high friction rubber tips enabling it to manipulate items that ...
The St Robotics electric fulcrum gripper is designed ...
Description:
The St Robotics electric fulcrum gripper is designed to be used for the R12 robot arm. This employs a DC motor and leadscrew to drive the gripper fingers. This unit has specific styled fingers with high friction rubber tips. It ...
The EG17 for the R17 robot is a ...
Description:
The EG17 for the R17 robot is a high precision DC powered linear parallel gripper with a large reach and tapped holes enabling customisation.The parallel gripper works by sliding the two jaws together in the form of a parallel gripping ...
The PG17 pneumatic gripper designed for the R17 ...
Description:
The PG17 pneumatic gripper designed for the R17 robot arm uses linear slides which enable high accuracy and repeatability. The basic option comprises of a pneumatic circuit and one gripper with 4 tapped holes for extra mounts enabling the fitting ...