Rocker Switch Actuator Tool for use with V Series

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MX
Productomschrijving

Coloured Rocker Switches, Contura Series

IP68 rating if used without panel assembly system
These switches are terminated with 6.35mm fast-on terminals and are supplied with a panel-sealing gasket
Illuminated versions are available with a choice of 250V neon or red or green LEDs with integral resistors for 12V operation
Also available is a bezeled panel assembly system which permits sub-assemblies to be snapped into place (system does not have IP68 rating)
Contact resistance: 10mΩ
Contact material: Silver
Panel cut-out: 21.08 x 36.83

Note

Switch supplied without actuator, see stk. no 665-528 etc typically
The black/green lens actuator 665-556 is not suitable for use with neon or red LED illuminated switches

Specificaties
Kenmerk Waarde
Accessory Type Actuator Tool
For Use With V Series
28 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
250 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 2)
1,825
(excl. BTW)
2,208
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
2 +
€ 1,825
€ 3,65
*prijsindicatie
Related Products
From ZF, the WR series of double pole ...
Description:
From ZF, the WR series of double pole on-off rocker switches designed for panel mounting. With a choice of red or green illumination or standard non-illuminated black actuators, these rugged rocker switches are ideally suited to high current applications. Once ...
Double pole 10A/24Vdc 'snap-in' rocker switch cases, fitted ...
Description:
Double pole 10A/24Vdc 'snap-in' rocker switch cases, fitted with 6.35x0.8mm quick connect terminalsAvailable in non illuminated or LED illuminated versions (with 12V or 24V red, green or amber single or twin LED's)A large variety of switch configurations and actuator colours/markings ...
Single pole 10A/24Vdc rocker switch cases, fitted with ...
Description:
Single pole 10A/24Vdc rocker switch cases, fitted with 6.35x0.8mm quick connect terminalsIlluminated version has 24V red LED's, with up to 6 terminalsSuitable actuators should be ordered separately (see typically 507-267 and range)Rear crimp connector housing 507-560 also available, to facilitate ...
A wide variety of actuator colours and markings, ...
Description:
A wide variety of actuator colours and markings, suitable for use with KR series switch cases (see typically 507-536, 507-429 etc)Most symbols meet ISO 7000 standard "graphical symbols for use on equipments"See also actuator removal tool 507-312Actuator material ABS.