Rocker Switch Blanking Plug for use with Rocker Switch

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MX
Productomschrijving

L Series Rocker Switch Accessories

Actuators

Actuators are available in various colours and with a wide selection of etched texts or symbols. You can also select options with a plain lens for illuminated switched or plain for non- illuminated switches. All etched actuators light up when used with an illuminated switch.

Accessories

A selection of mounting panels allows you to design your perfect panel. They give you a choice of how many switches can be mounted next to each other. There is also an option for a hole plug so you can plan ahead for any future upgrades. A connector housing can be pre-wired and installed in place behind the panel. That way when the switch is ready to be mounted the connector simply plugs into the back of the switch. It also means that any changes to the panel are simple and do not require any rewiring.

Typical Applications

Construction machinery
Agricultural equipment
On-highway transportation equipment

Features

IP67 certified sealed front panel components
Withstands temperatures from -40°C to +85°C
Vibration, shock, thermos-shock, moisture and salt spray resistant

Note

For, typical L Series Rocker Switches stock numbers see 913-1872 & 913-1945 and many more in the range.

Carling Technologies® Rocker Switches

Specificaties
Kenmerk Waarde
Accessory Type Mounting Plug
For Use With Rocker Switch
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 28-08-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 50)
0,967
(excl. BTW)
1,17
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
50 +
€ 0,967
€ 48,35
*prijsindicatie
Related Products
IP68 rating if used without panel assembly systemThese ...
Description:
IP68 rating if used without panel assembly systemThese switches are terminated with 6.35mm fast-on terminals and are supplied with a panel-sealing gasket Illuminated versions are available with a choice of 250V neon or red or green LEDs with integral resistors ...
Part M covers the entry and use of ...
Description:
Part M covers the entry and use of all building structures and facilities by disabled people, whether visiting, working or dwelling in them. This range of switches and socket outlets enables compliance with Part M, however the onus on following ...
Double pole 10A/24Vdc 'snap-in' rocker switch cases, fitted ...
Description:
Double pole 10A/24Vdc 'snap-in' rocker switch cases, fitted with 6.35x0.8mm quick connect terminalsAvailable in non illuminated or LED illuminated versions (with 12V or 24V red, green or amber single or twin LED's)A large variety of switch configurations and actuator colours/markings ...
Single pole 10A/24Vdc rocker switch cases, fitted with ...
Description:
Single pole 10A/24Vdc rocker switch cases, fitted with 6.35x0.8mm quick connect terminalsIlluminated version has 24V red LED's, with up to 6 terminalsSuitable actuators should be ordered separately (see typically 507-267 and range)Rear crimp connector housing 507-560 also available, to facilitate ...