Rocker Switch Connector for use with Rocker Switch

  • RS-stocknr. 507-277
  • Fabrikantnummer U2292
  • Fabrikant APEM
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

KR Rocker Cases - Double Pole

Double pole 10A/24Vdc 'snap-in' rocker switch cases, fitted with 6.35x0.8mm quick connect terminals
Available in non illuminated or LED illuminated versions (with 12V or 24V red, green or amber single or twin LED's)
A large variety of switch configurations and actuator colours/markings available
Suitable actuators should be ordered separately (see typically 507-267 and range)
To facilitate wiring harness preparation and quick panel assembly, all double pole switch cases can also be used with rear crimp connector housing 507-576, accepting up to 10 crimps terminals (except for 507-431, which can be used with connector housing 507-560)
Other accessories include switch case housings 507-611 & 507-615, panel blanking plugs 507-318 and actuator removal tool 507-312
Switch case panel knockout 36.80x21.08mm
Operating Temperature -40 to +85 °C
Contact Resistance 10 mΩ
Dielectric Strength 2,000 Vrms 50 Hz min. between terminals

//media.rs-online.com/t_line/L0507277-99.gif

IP68 Modular KR Series

Specificaties
Kenmerk Waarde
Accessory Type Connector
For Use With Rocker Switch
182 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
3,77
(excl. BTW)
4,56
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 3,77
10 - 24
€ 3,54
25 - 49
€ 3,24
50 +
€ 2,94
Related Products
Single-pole and double-pole configurationsLighted and non-lighted optionsAvailable in ...
Description:
Single-pole and double-pole configurationsLighted and non-lighted optionsAvailable in a wide variety of coloursHigh current switching in a compact packageVariety of terminal styles availableSelf-locking tabs to fit industry standard panel cut-outsMechanical life: min. 100,000 operations.
A fully approved double pole rocker switchFits into ...
Description:
A fully approved double pole rocker switchFits into the space traditionally required for a single pole switchDPST silver contactsConnection via 6·3mm faston connectors>3mm contact gapNylon 66 94 V-2.
The CW Switches are low cost molder rockers. ...
Description:
The CW Switches are low cost molder rockers. These rockers solder lug / quick connect terminals can be used with solder lug / quick connect terminals. Snap acting contact mechanismHighly reliableContact construction stationary and stableFront panel snap in mounting.
The M series rocker switches are designed with ...
Description:
The M series rocker switches are designed with three methods of panel mounting; flat frame, snap in and PCB. With its high insulating barriers the M Series rocker switches can increase isolation of circuits in multipole devices providing added protection ...