Rocker Switch Frame for use with Rocker Switch

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MX
Productomschrijving

Coloured Rocker Switches, Contura Series

IP68 rating if used without panel assembly system
These switches are terminated with 6.35mm fast-on terminals and are supplied with a panel-sealing gasket
Illuminated versions are available with a choice of 250V neon or red or green LEDs with integral resistors for 12V operation
Also available is a bezeled panel assembly system which permits sub-assemblies to be snapped into place (system does not have IP68 rating)
Contact resistance: 10mΩ
Contact material: Silver
Panel cut-out: 21.08 x 36.83

Note

Switch supplied without actuator, see stk. no 665-528 etc typically
The black/green lens actuator 665-556 is not suitable for use with neon or red LED illuminated switches

Specificaties
Kenmerk Waarde
Accessory Type Frame
For Use With Rocker Switch
16 op voorraad - levertijd is 1 werkdag(en)
Prijs Each (In a Pack of 2)
2,585
(excl. BTW)
3,128
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
2 - 48
€ 2,585
€ 5,17
50 - 198
€ 2,30
€ 4,60
200 - 498
€ 1,42
€ 2,84
500 - 998
€ 1,37
€ 2,74
1000 +
€ 1,285
€ 2,57
*prijsindicatie
Related Products
The switch inserts can be combined with all ...
Description:
The switch inserts can be combined with all frames of the DELTA line and rockers of the i-system DELTA product range. Switch inserts with claw fixing for flush mountingTitanium white.
Product Description The Molveno A1PRT1 is a splash ...
Description:
Product Description The Molveno A1PRT1 is a splash proof cover to be used with 19 x 22 mm switches. The cover is a frame over moulded with a PVC cap which is transparent to allow visibility of any legend or ...
Snap-in Panel MountSeries of single or double pole ...
Description:
Snap-in Panel MountSeries of single or double pole rocker switchesCentre off and non centre off versions availableFitted on a panel in a 12.7x15.25 mm cut-out with a maximum thickness of 3.18 mmA 5 mm Led clamp is available for mounting ...
A range of accessories are available to suit ...
Description:
A range of accessories are available to suit the Carling Technologies V Series Contura rocker switches. These include mounting panels, actuator removal tools which when used can accommodate most of any design needed.