APEM Rocker Switch Actuator Tool

  • RS-stocknr. 507-312
  • Fabrikantnummer U3052
  • Fabrikant APEM
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

KR Series Accessories

End and middle panels housings, which dovetail into each other, enable a side stacked cluster of KR rocker switch cases, to be assembled and positioned into a long panel slot
For mounting end panel housing order RS507-611 and for middle panel housing, order 507-615
A black panel blanking plug 507-318, useful for future switch extensions, is also available
Actuators can be removed with 507-312 tools (supplied in pairs), by placing the 2 claws under the support and pushing as indicated on the arrow on the tool
If panel mounting housings are used, assembled switches can be removed by inserting 2 tools between the switch and panel units, from the rear, to compress the snap in device

IP68 Modular KR Series

36 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
11,11
(excl. BTW)
13,44
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 11,11
Related Products
Shot moulded actuators with red or green sections, ...
Description:
Shot moulded actuators with red or green sections, which become visible in the ON positionSPST silver-cadmium oxide contacts Connection via .250in push-on receptaclesRetention barb design enables the switches to fit a range of cut-outsPolyester/Nylon actuator, Nylon caseIdeal where illuminated switches ...
Double pole 10A/24Vdc 'snap-in' rocker switch cases, fitted ...
Description:
Double pole 10A/24Vdc 'snap-in' rocker switch cases, fitted with 6.35x0.8mm quick connect terminalsAvailable in non illuminated or LED illuminated versions (with 12V or 24V red, green or amber single or twin LED's)A large variety of switch configurations and actuator colours/markings ...
Double pole 10A/24Vdc 'snap-in' rocker switch cases, fitted ...
Description:
Double pole 10A/24Vdc 'snap-in' rocker switch cases, fitted with 6.35x0.8mm quick connect terminalsAvailable in non illuminated or LED illuminated versions (with 12V or 24V red, green or amber single or twin LED's)A large variety of switch configurations and actuator colours/markings ...
Single pole 10A/24Vdc rocker switch cases, fitted with ...
Description:
Single pole 10A/24Vdc rocker switch cases, fitted with 6.35x0.8mm quick connect terminalsIlluminated version has 24V red LED's, with up to 6 terminalsSuitable actuators should be ordered separately (see typically 507-267 and range)Rear crimp connector housing 507-560 also available, to facilitate ...